Buy Now!
New Parking Brake Release Handle from 1AAuto.com https://www.1aauto.com/yt/i/1ABRC00006?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=qx0oGfV62NQ
🔧 List of tools used:
• Flat Blade Screwdriver
• 10mm Socket
• Ratchet
For More Info or Torque specs visit us at https://www.1aauto.com?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=qx0oGfV62NQ
1A Auto shows you how to repair, install, fix, change or replace a broken or worn out parking brake release cable handle. This video is applicable to the Chevy Silverado and GMC Sierra, years 99, 00, 01, 02, 03, 04, 05, and 06.
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
94 model please.
Thank You! 2005 Tahoe was a piece of cake. Wish I hadn't waited so long to fix it.
good job.. did ya disconnect the battery too.. cause i seen people ground out on bus box not
using right tools..
Is there a video on how to remove the e brake cable under a 05 GMC 2500hd 2wd truck
Thanks a lot, it took me 10 min on a 2009 Escalade!
It would have been much easier to use a pair of needle nose pliers to squeeze those tabs or even cut off the cable from the opposite side and push it through. Thanks for the video though.
Hi! So I drive a Chrysler town and country 2008 model. I pushed the e break way to far down and heard a pop. Now the pedal is loose and I can't engage the e break. I'm not sure what happened. Any help would be great.
You guys do great jobs with the videos. I followed the ebrake video and the instructions were great but the ebrake still was really stiff like I thought it would be. Now 2 year later it goes to the floor. I checked the shoes and they have lots of pad and the cable is tight when the peddle is on the floor, though the truck still will move a little. I am at a loss….
Thanks for the video… Just did it on GMC yokun 2008.. Almost 7 years after posting this video.. THANKS Agian .. Keep going
I need to know how to remove the parking brake pedal mechanism for 99 Silverado 1500.
The front cable that goes up in behind the pedal mechanism from the floorboard is broke.
Thanks , David
My cable broke this morning 3/2/2017 as I was getting ready to go to work. All I could think about was how much it was going to cost me to get it replaced. When I came home and looked up a YT video, I came across this video. I have a 2005 Suburban. Other than being close quarters, I think I should be able to do this on my own and save myself some $$$$$!! Thank you for your video. I really appreciate the time you took to make it.
could a bad cable be why my parking brake isn't staying locked
Wish you had one for the S10. My S10 parking brake cable snapped when it was engaged and up on ramps. I couldn't get it to disengage and it was kind of an emergency so I cut the front brake cable. So now I have to replace the handle, the cable AND the front brake cable.