https://www.1aauto.com/exterior-door-handle-pair/i/1adhs00009?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=d0n3CdcE5l8
1A Auto shows you how to repair, install, fix, change or replace a broken or snapped off Exterior / Outside door handle. This video is applicable to the 96 GMC Sierra K1500
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1ADHS00009
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• Flat Blade Screwdriver
• Phillips Head Screwdriver
• 10mm Socket
• 7mm Socket
• Trim Tool Set
• Ratchet
• Socket Extensions
• Painter’s Tape
• Pick
🔧 Instructions:
1. Removing the Door Panel 0:42
2. Removing the Interior Accessory Panel 3:16
3. Removing the Exterior Door Handle 6:16
4. Reinstalling the Exterior Door Handle 8:20
5. Reinstalling the Accessory Panel 9:01
6. Installing the Door Panel 11:32
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Another great design, GM! 🙁
I have a 1988 Chevy truck with roll up doors.. do y'all have a video for that?? Would my truck be easy compared cuz I don't have speakers or auto windows..
Thanks for posting. Really helped me out!
I did this yesterday on my 97 GMC Suburban. The video was very helpful, but not as easy as he makes it. The biggest problem is reconnecting the new handle. He shows you connecting both lock and handle from the outside, but this did not work for me. After connecting both the handle and lock it will not fit back in the hole. So I reconnected the handle only and then reconnected the lock after I hand tighten the bolts from the inside. The last thing I will say, is the lock will only come out of the old handle by breaking the chamber it is in. But this is ok because it easily fits back into the new handle. Great video!
Why do you skip forward when taking the handle out of the door, that's the hardest part that we need to see
Could you show the part where you installed the lock cylinder, I'm sure this part does not come with the new door handle. Or, do you put the lock cylinder in after installing the door handle part. Thanks.
OMG, I think I'll just leave my window down all the time and reach in for inside handle. When that breaks, will remove plates and leave along the road! 🙂
using the trim tool::::::: take whole truck apart
2:14 prying the light right there is a good way to break the reflector part right off! Ask me how I know! Instead, pry slightly behind it, closer to the inside door handle. The clip is right there, so you won't break your light.
I have a 96 Tahoe and the passenger side door only opens from inside, any idea what could be the fix or proper part for it?