Brian Eslick from How to Automotive http://www.howtoautomotive.com/ takes you step-by-step through the process of replacing the updated evap vent valve on a 2007 GMC Yukon Denali with 6.2 L engine.
Affiliate link mentioned in the video for ACDelco 23481275 GM Original Equipment Vapor Canister Vent Valve http://amzn.to/2j2mvGg ACDelco 19257603 GM Original Equipment Evaporative Emissions Canister Vent Valve Solenoid Jumper Wiring Harness http://amzn.to/2jo8VJD
Affiliate link mentioned in the video for B’laster 16-PB Penetrating Catalyst – 11-Ounces http://amzn.to/2i8oOrm
Affiliate link mentioned in the video for Autel AutoLink AL319 OBD II & CAN Scan Tool http://amzn.to/2j2zPKR
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: http://www.howtoautomotive.com/
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: https://www.facebook.com/How-to-Autom…
Google+: https://plus.google.com/+HowtoAutomot…
LinkedIn: https://www.linkedin.com/in/brian-esl…
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brain Eslick
Drop the spare and spray it with blaster, then retighten and drop again. Might have to do it a couple times to break it lose
I have the same Yukon and when I add gasoline it takes me too long because the gasoline rises quickly through the tube. That part solves the problem?
Great video, thanks. Unfortunately this did not fix the problem.
Is the air thing at the end is it suppose to be connected to anything or just sit up there we changed ours and it still shows something is wrong
Was this vent valve corrected in later years or does the entire Gen need to have this replaced ? (07-13)
Did you not need to replace the charcoal canister?
I installed it super easy with your video!!…but i didn’t change at all… still can’t fill freely! What now? Help please!
My 08 silverado is nothing like this
Is the process the same for the 2006 GMC denali?
Just wanted to say thanks for this video. Helped me a lot on my 07 Denali.
Will this same set up work on my 2011 Yukon Denali?
Read instructions for removing spare tire…………turn wrench clockwise to tighten it first then counter clockwise to let it down. If it dont come down repeat the process. Dumb shit, if you are going to make videos get your shit straight
Did I miss anything about needing the gas to be empty at all before doing this replacement?
Thanks for the video. I have that exact 07 denali and those codes.
Thank you for posting this video!!
Thank you for this install of the updated kit.
I just filled my tank and now have to replace this part for inspection. Does alot of gas come out when you take it off?
Will this install not work unless you clear the code? I replaced the whole assembly and still didn’t fix it. Still only pumps about 3/4 gal at the time before choking off.
The spare tire has a safety lock. Take it up first, then lower it.
Is this the fix for the p0449 code?
i have 2003 yukon denali hese same problem don,t matter year hese same or have some difrent
Does the 2010 suburban have the same wiring harness?
Can somebody help I ordered one of Amazon an it didn't have the black box at the in what is that part call or do I need it
Thank you so much! I'm looking to purchase an 07 Denali and this evap is one of the problems the vehicle needs fixed for inspection, aside from ball joints. Much appreciated!
i did exactly this job last week,,smoke tested the system with the truck running, leaked out of the filter,,did it again today, no leaks,,still throwing P0455, customer swears she didn't gas the truck running..Activated just the purge valve, running,,waited 10 secs, have good vacuum at the gas cap,,,a little head scratching now…when I get the truck back I will look at the values of the tank sensor on my scanner, cant report on that now.
Thank you so much for the video