How to Replace Power Steering Return Line Fitting 2007-2014 Chevrolet Silverado 2500HD

How to Replace Power Steering Return Line Fitting 2007-2014 Chevrolet Silverado 2500HD

Buy Now!
New Power Steering Return Line End Fitting from

This video shows you how to install a power steering return hose fitting on your 2007-2014 Chevrolet Silverado 2500HD.

This repair was done on a 2011 Chevrolet Silverado 2500 HD LT 6.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 2500 HD
2008 Chevrolet Silverado 2500 HD
2009 Chevrolet Silverado 2500 HD
2010 Chevrolet Silverado 2500 HD
2011 Chevrolet Silverado 2500 HD
2012 Chevrolet Silverado 2500 HD
2013 Chevrolet Silverado 2500 HD
2014 Chevrolet Silverado 2500 HD

Tools you will need:
• Pry Bar
• 18mm Flare Wrench
• 18mm Wrench
• 15mm Socket
• Hose Clamp Pliers
• Pliers
• 3/8 Inch Impact Gun
• Gloves
• Power Steering Fluid
• Safety Glasses
• Drain Pan
• Floor Jack
• Jack Stands
• Wheel Chocks


While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



@TRQ says:

√ Watch the Video
√ Buy The Part at 1A Auto
√ Do it Yourself
√ Save Money

Comments are disabled for this post.