Order Link: https://cruzekits.com/shop?olsPage=products%2Fv3-gm-14l-turbo-luvluj-pcv-check-valve-fix-kit
This video shows you how to install the V3 PCV Fix Kit from CruzeKits.com. This fix kit applies to the following vehicles with the GM 1.4L Turbo LUV, LUJ, or A14NET engine:
Corrections/additions to the video:
1:07: Not a boost leak; a *vacuum leak.*
6:37: Look down there with a *flashlight.*
9:05: After you push the clip in, just pull the screwdriver up and out; don’t yank it back again.
11:42: You’re installing the *nylon line* on those ends, not clamping with the vice.
15:10: It helps to put a slit down the length of the old nylon line to peel it back, just be careful not to damage the barbs.
2011-2015 and 2016 Limited 1.4L Cruze
2011-2019 Chevy Sonic/Aveo
2015+ Chevy Trax
2013+ Buick Encore
2011+ Opel/Vauxhall Corsa (Turbo only)
2009+ Opel/Vauxhall Astra J (Turbo only)
2010+ Opel/Vauxhall Meriva B
2011+ Opel/Vauxhall Zafira Tourer
This PCV fix kit addresses the missing/malfunctioning intake manifold check valve as well as replacing the corrugated hose that typically cracks, resulting in a check engine light. This kit along with a new GM valve cover will fix all of the PCV issues these cars have.
Related DTCs:
P0171
P0106
P1101
P0507
P0299
P2096
){kind=link}
Hey do you have a video on adding a catch can to it
hi, can i have the part number or size of the clip?
Any tips on removing the piece closest to the firewall? Won’t come out no matter what I do
So what’s gonna happen if you plug it n not add the check valve add on
the line runs to the check valves
do you cap the green and black line that run with the pvc to the turbo
Those check ball pvc's are sensitive to carbon buildup. Maybe use an older style pvc or reed valve.
Cleaning the pcv plumbing real good
So i did the valve cover I’m doing the manifold right now will the issue still persist timing lean code
I have a Dorman intake manifold that I cant see the check valve on because it is back inside the manifold. Will this kit work for that manifold? If so how would I see the check valve and how would I plug the hole?
How to buy cruzekit?
im this looking for 1.8
Have you come across a check engine light coming on because the catalytic converter in front of the engine is clogging or not flowing like it’s supposed to after the kit is installed because of excess blow by?
Is there a way to purchase the plug alone ? I installed the kit but I have to replace the manifold do to a crack in the back but want to keep the kit.
Iv done this kit. Worked great. Over a year later Iv changed the valve cover twice now, the turbo ended up failing and now I can’t find why I’m getting a p015b code.
Hello! I have changed the oil yesterday an i taught to check also the purge valve(the orange nippel is present) and the oil separator valve from camshaft cover. With the engine idling i put my finger over the camshaft cover valve i didn't feel no suction then i tucked out the oil level rod and i noticed constant suction from engine. Then i spray whater with soap on the camshaft cover valve and i noticed that it makes some bubbles and that it sucks the water with soap. Is it normal? Should be any suction ? Is my camshaft cover valve close to death? I have no errors and no lights on to the dashboard. Please advice! Thank you in advance!
Hi Dre, the cruzekit V3 PCV fix that you came up with is amazing, But i have a question for you, After installing the V3 PCV kit in any chevrolet Cruze, do I still need to change the Valve cover that was previously sucking air?
just ordered
Would this have anything to do with a MAF sensor code? I plan on using the kit for preventative maintenance in the future. But if that’s not why I’m running lean I’m gonna fix the problem first
Excellent job…
I would like to know what is the cost of one of those repair kits for the Chevi cruise, including shipping and handling in Belize?
Da Links leider gelöscht werden hier nochmal mein Kommentar in Ebay gibt es Neue Ansaugbrücken ohne Anbauteile für unter 100 Euro es wäre doch sehr Interssenat mal so eine zu öffnen um zu sehen ob dieser Stöppsel drinne ist!
How do you know if the check valve is clogged or goes bad?
Thanks for all your hard work. Installed mine today, with no trouble, thanks to your products and videos.
Hi @Dre Dan, I am worried about the South African post service, have you had any purchases from South Africa and did they get their part alright?Also, do you have a rough estimate of how many weeks it would take? Thank you