GM 3.6 LFX Fuel Rail Installation, How To Install!

GM 3.6 LFX Fuel Rail Installation, How To Install!

if you ever done these you probably fought with the rail and just luckily were able to get the rails removed/installed. i took the time to figure it out and the trick to getting them in. the video is about 10 mins close to real time installation and recording. i hope this video helps out anyone else having to remove an injector or rail on a GM 3.6 LFX engine

674
Like
Save


Comments

Matt Warwick says:

Thanks for this video!! Your info and video are going to help me install my injectors. I got them out but had no idea how I was going to get them back in. Thanks!

zay tyga says:

Did you put the rear bank in first or the front bank

Blake's Restoration and Automotive says:

We've used an old school trick also, vaseline on the seals, if it's hard get the rail down

Turbo TyTy says:

Interesting, what model is this engine in?

Nuts & Bolts with Tone says:

Great video Davion. I really feel like I would be better suited to install the fuel rail after watching your video. Thank you for the install tip.

Mi says:

Did you reuse the seals?

Comments are disabled for this post.