https://www.1aauto.com/ford-shock-absorber/i/1asha00198?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=O_E2nnXcisQ
1A Auto shows you how to repair, install , fix, change or replace your front shocks with their loaded struts. This video is applicable to the 97, 98, 99, 00, 01, 02, 03 Ford F150 pickup truck.
✔ List of Auto Parts from 1AAuto.com Related to This Repair:
1ASHA00198
1ASSP00731
KYSHA00134
KYSSP00208
MNSHA00202
MNSSP00783
MNSSP00786
🔨 List of Tools Used in this 1AAuto.com How-To Video:
• 10mm Wrench
• 18mm Wrench
• 10mm Socket
• 18mm Socket
• Vise Grip Pliers
• 1/2 Inch Breaker Bar
• Rust Penetrant
• Floor Jack
• Hammer
• Jack Stands
🔧 Instructions:
1. Removing the Rear Shock 0:25
2. Installing the Rear Shock 3:26
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Does this apply to a four wheel drive?
I have a 2003 SuperCrew F-150 is there a reason why the right rear shock has two different mounting positions one for in front of the axle and for behind the axle when I first got the truck the right rear shock was over the axle facing the engine but now I switched it to over the axle facing the rear????
i notice the new shock don't come with a bolt, i had to use the old one
Can i do this without the truck being lifted in the air
any idea where i might be able to buy one of the lower shock brackets? mine is bent like you showed in the video but so much that i cant put new shock in.