1A Auto shows you how to repair, install, fix, change or replace a rusted, damaged, rotted, or leaking fuel tank. This video is applicable to the the 01 Ford Ranger
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oXJ/1AXAA00013
• 13mm Wrench http://1aau.to/oj6/1AXAA00010
• 8mm Wrench http://1aau.to/obI/1AXAA00011
• 13mm Socket http://1aau.to/oNt/1AXAA00015
• 8mm Socket http://1aau.to/oIh/1AXAA00017
• Channel-Lock Pliers http://1aau.to/oaF/1AXAA00139
• Ratchet http://1aau.to/oYP/1AXAA00016
• Socket Extensions http://1aau.to/oNt/1AXAA00015
• Gloves http://1aau.to/ocM/1AXSS00048
• Safety Glasses http://1aau.to/o2/1AXAA00343
• Floor Jack http://1aau.to/oof/1AXAA00068
• Jack Stands http://1aau.to/oop/1AXAA00065
For More Info visit us at http://1aau.to/h/aHo/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Need a gas tank for a 1997 Ford ranger
Why can’t there be a video with a 2000 model
Helpful video but it might pay to state the obvious. Get most of the gas out before you start so the full tank of gas doesn't fall on you!
On the 1993 Ford Ranger PU (125" wheelbase), the fuel tank would not simply 'drop straight down'. It would not go back far enough until we removed the bolt out of the rear shackle for the leaf springs, removed the driver side shock at the top mount and unbolted stuff on top of the rear axle. What a crappy design… way to go Ford. Can't even buy a fuel tank for a Ranger. What a world.
Thumbs up before I saw this, You always that good thanks
Did you happen to notice (or would you happen to know) if there's a check ball in the filler neck for those trucks? Trying to get the fuel out of the tank of a 98 Ranger that's been sitting around for a couple years to replace it with some known good fuel, trying to figure out the easiest way to do it… if there is a check ball valve, think I could probably just drop the tank enough to remove the filler neck and siphon from there?
1995 super cab. Tank will not come out. There is a bulge in the tank that fits in the frame. Cant lower the tank because I cant clear the frame. Cant move the tank towards the driveshaft enough.
If you are trying to do this with just a jack, you really need to jack it up by the frame to get the driveshaft down far enough to be able to get the tank straps off, as seen in https://youtu.be/OKbo6wrKCk4?t=276
I want to get a screw jack. What is the model of the one in the video?
1992 ranger is little different but i want i trying tank you tank you have I god day
What's the connector on the back of the tank ? And what's its purpose
You should be able to unscrew the filler from the outside rather than taking the hose off, I think?
is this the best way to replace the fuel pump? or bed removal is easier?