Buy Now!
New Sway Bar Link from 1AAuto.com https://www.1aauto.com/*/i/MCSFK00013?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=-rfG92yPLUw
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 98, 99, 00, 01, 02, 03, 04, 05, 06, 07, 08, Ford, Ranger
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tCk/1AXAA00013
• Pry Bar http://1aau.to/te/1AXAA00020
• 16mm Wrench
• 18mm Wrench
• 16mm Socket http://1aau.to/tbE/1AXAA00015
• 19mm Socket http://1aau.to/taY/1AXAA00043
• Vise Grip Pliers
• Ratchet http://1aau.to/tM/1AXAA00016
• Socket Extensions http://1aau.to/tbE/1AXAA00015
• Torque Wrench http://1aau.to/tm/1AXAA00044
• Anti-Seize Grease
• Floor Jack http://1aau.to/ti/1AXAA00068
• Jack Stands http://1aau.to/tk/1AXAA00065
For More Info visit us at http://1aau.to/h/au/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Thx it worked…very good video
video starts at 6:30
I can't believe you actually showed us how to take a damn Center cap off.
I only had one left that finally broke loose and was hanging down. Sawed off the bolt and replaced in 7 min on ramps, no need to remove anything. The bar swings up to allow for inserting the links. Remember to leave the first one unbolted until the second is in place, then crank em down. Thanks for the video sir!
Anyone notice he turned it clockwise not counterclockwise
Is the middle part suppose to be able to move. I just checked my stabalizer and that middle piece moves up and down dont know if its just not tightened enough
Excellent video….answered all my questions
step one to remove get a saw
they call sway bar the same as stabilizer bar
OMG You were turning the nut the wrong way (clockwise) instead of (counter clockwise) that is why you broke the bolts off on both sides! Remember lefty loosey, righty tighty? Otherwise a good video
what are the purpose of having those? mine doesnt have them
How do you know how tight to tighten the sway bar?
Great video!
That helps, thx..!