http://www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397 1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or da…
http://www.1aauto.com/1A/WindowRegulators/Ford/Focus/1AWRG00397 1A Auto shows you how to repair, install, fix, change or replace a slow, stuck, cracked or da…
You must be logged in to post a comment.
There should be a couple of screws on the end of the door that hold it in place, you would also need to disconnect any rods or cables from it on the inside of the door. 1aauto.com 888-844-3393
How do you replace the front door handle latch?
Thanks. That video was very helpful.
The video will show you how to detach them from the regulator.
How did you remove the windows ?
THANK YOU THANK YOU THANK YOU!! This work on my 2005 ZX4 Focus. Paid $128 for the complete OEM regulator. Took a few hours. Could do it again in 30 min. I really appreciate the time you spent on doing this video. You’re instructions worked like a charm.
Quick question, do you recommend greasing anything up? When I removed the original regulator, there was a little bit of grease in random parts.
If you are having issues getting the window to come up and down, you should attempt to remove the motor, if you cannot access the motor bolts, you will have to cut the metal cable to free up the window so it can slide up and down.
Hi i’m having trouble moving the window down by hand as it is stuck in its highest postion, any help would be appreciated please?
Many thanks from the UK for your tutorial – it saved me paying garage labour rates!
I found that I didn’t have to remove the glass completely.
Once I released it from the holders, I simply pushed it up in the frame a few inches and wedged a piece of card between the glass and rubber channel to stop it slipping back down. I also added a strip of Duct tape from the glass to top of door frame for extra support!
The tutorial is indeed excellent, it would have saved me some brain-work if I had watched it first. However, the way to release the handle cover is through and access hole under the handle. Stick a small screwdriver through the hole and pry the cover off. This will prevent scratching up the door handle.
Thanks for watching. Have a great day! 1aauto.com 888-844-3393
You may need to remove the door panel to unlock the door from the inside, or if you have a remote you could try to pop the locks open using that. Our sales staff could help you out with replacement parts. Our toll free number is 888-844-3393 1aauto.com FREE SHIPPING in the lower 48 states.
My ’01 Focus has the front passenger door locked and cannot be unlocked. A friend pulled too hard on the exterior handle and broke it, so now I’m stuck unable to open the door at all. Any help or advise will be greatly appreciated and I am also in the market for a new handle for the exterior. Please contact me at bojack6669@att.net or by calling 317-372-8483
Many thanks for the complete tutorial.
I wish you all the best.
cidibi
Italy
You’re welcome. 1aauto.com 888-844-3393
Thanks a lot!
Yes it will be the same as the Ford Focus shown in the video.
I have a Ford Focus -01 1.6l motor where the window regulator all of a sudden didn´t worked when i pushed the button. No grinding sound or anything at all, it just happened. I can hear a klicking from a relay, which seem to be inside the dorr, when i push the button but nothing happens so im clueless, maybe the motor?
Will the panel with screws and such be pretty much exactly the same for my car then for the car in the video?