How to Install Replace Automatic Transmission Shifter Lever 1997-03 Ford F-150

How to Install Replace Automatic Transmission Shifter Lever 1997-03 Ford F-150

https://www.1aauto.com/shifter-lever-ford-oem-4l3z-7210-baa/i/fdtsr00015?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=ErztaJSkHBQ
In the video, 1A Auto shows how to replace a loose, stuck, or broken automatic transmission shifter. The video is applicable to the 97, 98, 99, 00, 01, 02, 03 Ford F150, pickup, truck

🔧 Instructions:

1. Removing the Steering Column Cover 1:24
2. Removing the Shift Lever 1:58
3. Installing the Shift Lever 4:29
4. Installing the Steering Column Cover 6:05

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

20,088
Like
Save


Comments

Black Riflemen's Organization says:

Great tutorial. I am looking to do something similar in a ram 3500. I need to change the lever to improve leg room. The bend in the lever causes it to hit my knee while in drive. Can the lever on the Ford be installed upside down, so that it curves in the other direction ( away from the knees ) ? Appreciate Any Insight You Can Provide.

Mr,Buttery says:

I WAS WONDERING, WITH THE PROBLEM I'M GIVING WITH MY 1997 FORD EXPEDITION GEAR INDICATOR NOT MATCHING THE GEAR LETTER AND WHEN I THINK IT'S IN PARK, IT START TO MOVE, THEN I HAVE TO GIVE THE GEAR HANDLE A LITTLE WIGGLE AND…..THEN ITS IN PARK. IS THIS AN INDICATION OF A GEAR SELECTOR OR THE CABLE TO THE TRANSMISSION?
THANKS FOR TAKING THE TIME TO EVEN CARE ABOUT US..

Dan Thurston says:

I would like to see how you actually disconnected and connected the wiring clip without dropping the lower dash panel.  There is also a third retainer above the connector that makes pulling the wire through after disconnecting nearly impossible.  Dropping the panel  is not difficult and gives you a lot of room to work.

William Miller says:

Can you do a video on where I can pug I'm my scanner for a 2016 Dodge Grand Caravan?

Reply to Dan Thurston Cancel reply