Thank you so much for this. My mechanic busted my deck that was original to
the car and didn’t put it back in flush. So now I have to find a
replacement and fix it myself.
thanks but i need to knoww the name of that grey connector because i tore
it off and threw it away i have the same system you have premiem sound so
do you know what that wire harness is called the grey one one 2:14 the
connetor
while installing my aftermarket into my mustang the ground wire (black)
touched the 12 v wire (red) now my stereo isn’t turning on, it only works
when I connect the red 12v with the yellow 12v and everytime I turn off the
car it resets the stereo and my station presets along with the
equalizer..how can I fix it??
i dot have a pic of the peace you pop it off saying “the main power
connector ” i need to know what that grey part at the end of the wires is
it goes in the back of the radio ?
when i got my 2000 mustang it already had a afterstock radio in it, I wanna
put a new updated one in but I cant figure out how to get the old one out
any help?
My question is, my center concole vibrates when i start reaching higher
speeds and ive placed like paper mache on the bottom but is there a way to
tightne up the console? it looks like i have to remove the streo and cd
player but what would be the right steps.
It is common for the cover on the connector to pull off. The cover can be
snapped back on once the connector is removed. If the cover was ripped off,
there is no need to put it back on the connector, stereo will be fine
without it. The Mustange in this video has the premium (amplified) system.
If you have the basic system, there is usually two connectors, both very
similar. All connectors have a “Key” on them, they will fit only one spot.
){kind=link}
You just saved me a couple hundred dollars! Thank you sir
Thank you so much for this. My mechanic busted my deck that was original to
the car and didn’t put it back in flush. So now I have to find a
replacement and fix it myself.
I have just the same but it don’t work … Can you give me an adress to buy
another please ? I’m French living in France. thanks.
Thanks so much just bought the tools like 2min. ago
thanks but i need to knoww the name of that grey connector because i tore
it off and threw it away i have the same system you have premiem sound so
do you know what that wire harness is called the grey one one 2:14 the
connetor
What kind of wiring harness do you have to use for this?
Thanks alot fella. Was real helpful.
No, but I suggest the wire harness.
Hi what are the two hooks u have to removal the stereo called i want to buy
them at a store but dont know the name of them
while installing my aftermarket into my mustang the ground wire (black)
touched the 12 v wire (red) now my stereo isn’t turning on, it only works
when I connect the red 12v with the yellow 12v and everytime I turn off the
car it resets the stereo and my station presets along with the
equalizer..how can I fix it??
i dot have a pic of the peace you pop it off saying “the main power
connector ” i need to know what that grey part at the end of the wires is
it goes in the back of the radio ?
It is a safty precaution.
Send a picture of what you are missing to fcsr@msn.com. We may be able to
come up with what you need.
Does anyone know what wiring harness I will need for my mustang with the
Mach 460 sound system so I can put a aftermarket deck in???
Ford Din Removal Tools. They can be purchased from our website.
when i got my 2000 mustang it already had a afterstock radio in it, I wanna
put a new updated one in but I cant figure out how to get the old one out
any help?
Every manufacturer for aftermarket stereo has their own set of removal
tools.
Check ALL fuses in the vehicle.
When putting in a aftermarket stereo, what if all that will plug in is the
main power connecter and antenne?
Can you make a stereo installation video? No one has them for 1994-2000
mustangs.
Dumb question here do I have to remove the negative battery cable before I
remove and install the radio
My question is, my center concole vibrates when i start reaching higher
speeds and ive placed like paper mache on the bottom but is there a way to
tightne up the console? it looks like i have to remove the streo and cd
player but what would be the right steps.
Will this work for 2003 mustang?
i tried the hanger idea. works like a charm
It is common for the cover on the connector to pull off. The cover can be
snapped back on once the connector is removed. If the cover was ripped off,
there is no need to put it back on the connector, stereo will be fine
without it. The Mustange in this video has the premium (amplified) system.
If you have the basic system, there is usually two connectors, both very
similar. All connectors have a “Key” on them, they will fit only one spot.
There are usually amplifiers in the Ford systems. There are several
different Ford aftermarket wire harnesses available. The right one will
work.
i would suggest to put in a shelf so you could put some things in it or you
could just keep the cd player disconnected but still installed in the car
Leave the CD player to fill the hole.
Those hooks look kinda like a hanger would I be able to custom a hanger to
fit in the holes
Thanx for the reply! I found 2 blown fuses yesterday and replaced them. My
stereo is now working correctly
do you have to buy a radio kit?
The thing you pop off on 2:18 whats it called i ripped it and cat find that
grey harness?