$25,000 MAJOR SERVICE?!?! Naa, let's DIY it! Ferrari 348 Major Part 1

$25,000 MAJOR SERVICE?!?! Naa, let's DIY it! Ferrari 348 Major Part 1

Ricambi America: https://www.ricambiamerica.com
Use the code NGS10 to get 10% off your order!!!

Part 1 of the Ferrari 348 DIY Major Engine Out Service. The Ferrari 348 requires the engine to be pulled every 3-5 years or 25,000 miles to replace the timing belts. Usually this also entails replacing many other components such as the tensioners, water pump, bearings, and pulleys. Typically this service starts at around $10,000 at most reputable shops, and can easily cost upwards of $25,000. We are going full bore and replacing almost everything that can wear so the engine will be almost as good as new and give Tim many years of use.

In Part 1, we being the engine removal process starting from the top down. We remove the intakes, exhaust, wheels, fender liners and other parts to prepare the engine for removal.

Follow Tim’s Instagram @tim3forza8
Follow Josh’s Instagram @thecollaudatore
If you’d like to use some of Josh’s services, please email me dan@normalguysupercar.com

RENT MY CARS with Drive on Demand: https://driveondemand.com
My Ferrari F430 Buyers Guide: http://bit.ly/F430-Buyers-Guide
Need help buying a Ferrari? Let’s chat: http://bit.ly/NGS-Hourly-Consultation

Consider buying my sponsor’s stuff so I can keep doing this.
Ricambi America for your Ferrari and Maserati parts, use NGS10 for 10% off: https://www.ricambiamerica.com/
Shell V-Power NiTRO+: http://bit.ly/ngsvpower
Authentic Details: https://www.authenticdetails.com
Avalon King Ceramic Coating $25 off: https://avalonking.com/shop/armor-shield-ix-diy-kit/ref/normalguysupercar?coupon_code=ngs25
No Spots Pro – http://www.nospotspro.com
The DashCam Store – http://www.thedashcamstore.com?aff=25
SoloShot3 – https://soloshot.com
BlackVue DR900S-2CH Dash Cam – https://www.thedashcamstore.com/blackvue-dr900s-2ch-dual-lens-4k-gps-wifi-cloud-capable-dashcam-for-front-and-rear/?aff=25
BlackVue – https://www.blackvue.com
Ray Ban – https://www.ray-ban.com
NewAir WindPro18W Promo SUPERCAR for 20% off – http://www.newair.com/fans/windpro18w-industrial-wall-mount-fan?utm_source=youtube&utm_medium=NormalGuySupercar&utm_campaign=WindPro18W

T-Shirts: http://www.normalguysupercar.com/product-category/t-shirt/
Facebook: https://fb.me/normalguysupercar
Instagram: https://www.instagram.com/normalguysupercar
Twitter: https://twitter.com/normalguysuperc
Subscribe: https://www.youtube.com/normalguysupercar

Want to pay the Ferrari Tax? Use the coupon code “Ferrari Tax” on my website (http://www.normalguysupercar.com) and it will DOUBLE the cost of everything!

My Ferrari Documentation Spreadsheet: https://docs.google.com/spreadsheets/d/1bfZZoopvqMjJh28xqv57TRElt19x6EokgZ-W7cJBuM4/edit?usp=sharing

Some of the Hardware I use to make these videos…
Primary Camera: http://amzn.to/2Fo1vSa
Mavic Air Drone: http://amzn.to/2HexFzZ
POV Video Glasses: http://amzn.to/2wVDzUs
GoPro Hero 5: http://amzn.to/2wVL7Xr
GoPro Suction Mount: http://amzn.to/2xrMfDr
GoPro Mic Adapter: http://amzn.to/2eRaQpS
Favorite Mic, Rode VideoMic Pro+: https://amzn.to/2O2a6yH
Rode VideoMic Pro: http://amzn.to/2y0aUfj
Rode VideoMic: http://amzn.to/2gZEPwm

26,943
Like
Save


Comments

Andrew Thacker says:

Nice clip, nice to see people enjoy what they are doing.

as ter says:

Brilliant!! 5/5

Shane Broussard says:

Too difficult to watch your videos. Clearly, you guys are having fun cutting up but I would rather you focus on the car and the technical aspects of what you are doing. Can find plenty of bros on youtube.

SH says:

Awesome how you guys are doing it yourselves, but you made me cringe seeing wheel fall on the rotor, socket slapping around the walls when removing the lugs, and the ratchet banging against the paint at 4:27

Over Torque says:

I was a mechanic for 15 years, did an engine out service on an F355 F1 (what an experience) but I have to say you guys look like a lot of fun to hang out with! Wish I could work with yinz!

Becker Inal says:

Italian Engineering at finest. Italians should only design the Body and stay away from anything else.

Ryan Parkinson says:

Awesome! So many people working on one car at once – it looked like Ferrari surgery, which apparently requires beer for the surgeons.

Daniel Thomas says:

Most people don't like the 348 ,but I do….and dio

joe jung says:

Amazing job nice to see DYI projects that is touches back to your roots. Pls more footage of the whole job. Love learning about Ferrariā€™s. Dan your show inspired me to get an 430 and DYI all the work. It was an awesome feeling of accomplishment so thank you for your inspiration keep it coming!!

Brandon says:

How much do 348s average for now? Curious as a possible consideration.

Steven Farmer says:

Good to see this car getting the work done on it. I remember talking about this at the Influencer Invasion.

bigbuckeye76 says:

Two minutes in and I am thinking…..LS Swap

Euro 777 says:

Damn dude Tim looks like your twin!

Comments are disabled for this post.