How to Install Replace Front Sway Bar Links 2006-08 Dodge Ram 1500 BUY AUTO PARTS AT 1AAUTO.COM

How to Install Replace Front Sway Bar Links 2006-08 Dodge Ram 1500 BUY AUTO PARTS AT 1AAUTO.COM

https://www.1aauto.com/sway-bar-link-pair/i/1asfk02367?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=2h1WrD-tb6k
1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, loose, or damaged tie rod. This video is applicable to the 06, 07, 08 Dodge Ram truck.

🔧 Instructions:

1. Removing the Sway Bar Link 0:33
2. Installing the Sway Bar Link 4:07

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

29,297
Like
Save


Comments

necstanunn says:

What bushings are those on the sway bar ? Do they differ from the Mega cab?

Tristan Pierce says:

Is there a torque spec for these sway bar end links?

913 KMG says:

How can I get my hands on one of those shirts he's got on? Lol! Epic!!

Chris X says:

My 07 ram looks completely different. (2wd) The tie rods are in front of the end link, so i cant rotate the sway bar forward. Also, the lower control arms have a different look. This job required one different size box wrench, a 17mm instead of 18mm. Either they redesigned this in 08 (I dont think so), or my truck is a different variant with the tow package, maybe a different sway bar. Weird and confusing.

Johnny Utah says:

Does that fitting on the bottom of end links have to be greased when installing new end links?

Reply to Chris X Cancel reply