This is how I install a harmonic balancer. I find this process works on most engines.
How To install A Harmonic Balancer/Crankshaft Pulley | Dodge 5.9 360 Magnum
22,543
Like
Save
){kind=link}
Comments
Comments are disabled for this post.
This is how I install a harmonic balancer. I find this process works on most engines.
Comments are disabled for this post.
How did you keep the engine from turning over while you torqued it down?
So the balancer and crank pulley is one piece? Im looking to change mine
how did you get the balancer on so easy. i thought they had to be pressed on. im doing my timing chain in a week. thks
How did you get it off? I’m having trouble
I just wasted 34 sends on this…. whatever you call it
I will soon be putting my balancer back on (Engine still in the car) I see you locked the camshaft from spinning with a screw driver, question where did you jam the screw driver?
Have a 95 dodge ram 360 I loaned to my daughter for a few short months and when I got it back the exhaust was gone as was both running boards and had this awful clanging noise when it was revved up. Looked under the hood to find the HB dangling there. Don't know what she did or how she did it but I'm at a loss on how to fix it.
U know I thought harmonic balancers were just about invincible, but last month a friend of mine was driving dn the Rd & we started feeling the motor shaking pretty bad. Pulled over & The harmonic balancer had cracked. Goes 2 show if U live long enough U will C anything !
Always a pleasure to see Garen at work!