Quick fix for passenger side low beam head light.
for 3rd gen Ram trucks. CHEAPER ALTERNATIVE SOLUTION!! #livingthedream#lovemyHemiRams
Quick fix for passenger side low beam head light.
for 3rd gen Ram trucks. CHEAPER ALTERNATIVE SOLUTION!! #livingthedream#lovemyHemiRams
Comments are disabled for this post.
I changed my pcm and now my horn and wipers and blinkers work but not my ac or cluster they said I need the bcm program that true
Yo! I had the problems for 5 years, I just roll with it lol without any problems until I seen your video. Real talk. The only thing that's not working is my speedometer. (No cruise control.)
That's the body control module
hi, Would this help for the 2 front parking lights on after the truck is off? mine stay on and drained my battery of course.
My truck was doing the same thing, replaced the module, no difference.
Same thing.
I’m going try this, thanks man!
Mannn you just saved me a complete wire harness tear down and about $750 in labor. My rear park, and front running light fuse keeps blowing at high RPM’s. If I stay under 3500-4500 rpm’s, everything is fine, but if I gun in my 5.7, the park light furs blows. I searched all the harnesses for shirts and never found any. I was about to bite the bullet and take my car to dodge and have them find/create the problem. I did a bit of looking and didn’t find anything until I saw your video. I’m about to hit eBay and get a FCM right now.
Thank you so much for this video it is simple to understand and very helpful
Does anyone know if I have to program it if I buy a new one
Does your taillight go out as well?
Nice video. I got the same problem mine is a 2004 dodge ram 1500 crew cab. Any FCM will work on my truck?
The owner's manual says the fog lights only operate with low beams
Hell yeah…
This answered the burning question I had on vin programming… why? Will it work without it? Well… now I know.