Dodge Ram 1500 4×4 – CV Shaft Replacement – DIY EASY!

Dodge Ram 1500 4×4 – CV Shaft Replacement – DIY EASY!

Today, my buddy and I are going to show you how to replace a CV shaft (also called CV axle) on your 2009 – 2018 Dodge Ram 1500!

CV shafts go out fairly often, and you can save money by doing it yourself! And its easy!

Its a pretty straight forward process. The toughest part is breaking the ball joints loose so the spindle can come off. Just keep hitting it with the hammer, it’ll give.

Make sure to like, comment, share and subscribe!

Feel free to ask me questions, hope this video helps!

Disclaimer:
I AM NOT A PROFESSIONAL
Due to factors beyond the control of myself, I cannot guarantee against improper use or unauthorized modifications of this information. I assume no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. I recommend safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of myself, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Jake.

12,297
Like
Save


Comments

Gary Kovach says:

Yup, definitely gonna invest in those Milwaukee's. Tired of draggin the hose everywhere.

Dennis George says:

Nice video guys. Confident I can do it with a friend after watching this.

kevie88 says:

No need to pop the bottom ball joint, you can fanagle it in there with the knuckle on an angle.

Kurt Kistenmacher says:

About how long did it take y'all to do?

Comments are disabled for this post.