It looks like this pan has a windage tray as apart of the gasket? … is that correct? So this can be done with windage tray? Also, are you just putting some black RTV on existing gasket to reseal the pan? … are you doing top and bottom surfaces with RTV or just top as the bottom appears to still be sealled? Thanks for the great video and help. This looks like it'll help make my 2013 Jeep GC lifter/cam job a lot easier!!!
You can’t turn the pump without dropping the old pan !!! There are two bolts that are holding the pickup tube. This didn’t work for me in have to drop the pan tomorrow
Wow dude you just saved me a whole lot of time. I was so bummed with the other vid I watched as he had the abs pan and could bend it enough. I have a 6.4 SRT so mine is also aluminum. Bless you sir
){kind=link}
I will never forget this tip!
Can this be done on dodge charger scat 6.4l?
Has anyone removed the pickup tube from this position without dropping the oil pan? I’ve tried and looking to see if I could before dropping the pan
Is the hemi jeep the same ? So once you remove the bolt from the pickup tube, it’s loose? No other bolts holding it ?
Mine is bolted to the pan, doesn't work for me unfortunately. I'm struggling
What about the rear 13 min in the middle of pick up tub? How is your pickup tube moving so much
I’m glad I seen this video bro
So let's see you pull the pump off? That's because no matter which way you turn it it won't come off been there done that
It looks like this pan has a windage tray as apart of the gasket? … is that correct? So this can be done with windage tray? Also, are you just putting some black RTV on existing gasket to reseal the pan? … are you doing top and bottom surfaces with RTV or just top as the bottom appears to still be sealled? Thanks for the great video and help. This looks like it'll help make my 2013 Jeep GC lifter/cam job a lot easier!!!
You can’t turn the pump without dropping the old pan !!! There are two bolts that are holding the pickup tube. This didn’t work for me in have to drop the pan tomorrow
Great idea thanks
Pick up tube will not go all the way down it has another bolt supporting it it’s ok just let it go
Wow dude you just saved me a whole lot of time. I was so bummed with the other vid I watched as he had the abs pan and could bend it enough. I have a 6.4 SRT so mine is also aluminum. Bless you sir