**If the video was helpful, please give it a “thumbs up” and consider subscribing to the channel.**
This video goes over how to replace your front wheel bearing on a 2006 Chrysler Town & Country or Plymouth Voyager. Bolt and sizes may vary, but the process is basically the same for any 1996-2007 model. Once done, it is a good idea to pump the brakes before moving the vehicle. This procedure would be the same for the left or right front wheel bearing. You don’t want to over tighten, but it’s better than it coming loose! Wheel bearings come with either a 1 year or 3 year warranty. If you live in a state without a lot of rust or corrosion, this should be a pretty straight forward process. If not, a hammer or a bearing puller/axle puller set would be helpful. These can be bought and then returned at most major auto parts chain stores as loaner tools so you are not charged. The 32mm nut should be torqued 120 to 140 ft pounds.
Jack and Jackstands
Front Wheel Bearing
These are the tools we used or something that’s similar. There are many manufacturers and various prices. It’s a good idea to buy the better tool with the best warranty and easiest exchange in case of tool failure.
CarBible assumes no liability for property damage or injury that happens as a result of any of the information contained in this video. Any information learned from this video is to be used at your own risk. CarBible recommends safety first! Protective gloves, safety glasses and jack stands are highly recommended. These tutorials are made strictly to help people with their car projects and are given to provide factual information we’ve learned over the past 40 years working on cars. We do not guarantee any particular result or any particular warranty. Any injury, loss or damage contained by the viewer while attempting to follow the video’s instructions is solely the viewer’s fault and not CarBible.