In this video I go over steps at replacing a ABS module in the Chrysler Dodge Charger Challenger Magnum 300 and even Jeep models. Keep in mind, module will have to be initialize to work properly.
#ABSModule
#ABSLightOn
#TractionControlLight
If this video in any way helped you save time and money, please consider donating.
Paypal Donate Link here: https://www.paypal.me/OnlineMechanicTips?locale.x=en_US
Cash App $JohnnieThomas
){kind=link}
Any chance you know how much that piece usually cost for a 2010 dodge challenger
The hardest part wasn't shown which is taking out the torx screws on that module in tight spaces. That would be helpful.
I found you can send module to UPFIX for about 1/2 the price, they will repair and you don't have to have it reprogrammed or flashed since it came of your vehicle.
Hi nice video. Can I have a link for the initialization.
1:12 Read my a bout page for best call of duty h ac ks
How did you handle the bottom rear bolt? That's the hard part of this job.
Does the abs module need to be programmed after being replaced on a 2015 3500 ram?
Can this work on a Dodge Charger 2014 SXT? What is the part number?
My scan tool sales every type of upgrade for $50. I bet you is about $5,000 worth of upgrade available on that thing…. this may be my first $50 upgrade pack for it
I can reference this video for 2012 charger?
Do you have to take it and have it recalibrated
Hey I have a question for you I have a 2007 chrysler 300c 5.7 and my battery died and now my abs module has lost communication to the pcm what could be the cause for this
i have a 06 srt8 that needed the module and pump change. the mechanic i had fried my new one i replaced and made my care worse. i took it back from him and got those parts replaced again. only problem i'm having is that i can't get it to initialized. I have the Autel Maxicheck scanner that let's me get to the part where it's suppose to start the test but fails before it even starts. i got the abs light , engine light and configuration mismatch. car been sitting in the garage for almost 2 years now because of that one issue.
Where did you get the module? Looking for a module for a 2010 Chrysler 300
Which company would you recommend getting an ABS module for 07 Jeep wrangler jk?
I have a 2013 charger rt. Abs brake and tsc light on. Scan tool won’t communicate with abs system. Could this be the problem?
My 2009 Chrysler aspen has all 4 lights on. Hope
This is the problem
You have to reprogram?
How u get the wire harness off? Difficult asf.
I'm having this same issue….any mechanic recommendation for nc?
Did you have to bleed the brake lines
Come on JT replace those rubbers. Do it right.
It reminds me of an ABS module I helped a neighbor replace on an ‘09 Toyota Camry. We didn’t need to program it.
Ok JT, Big question Did it work?
This is great advice, JT. Gotta have the right tools