How to install a wheel speed sensor on Dodge Challenger Charger Chrysler 300

How to install a wheel speed sensor on Dodge Challenger Charger Chrysler 300

In this video I show how to install a wheel speed sensor on a dodge challenger but it should be the same on a Dodge Charger and Chrysler 300. I needed to install a new sensor to make my ABS light turn off on the dash.

Wheel Speed Sensor Front Left or Right – https://amzn.to/3orUZiT

42,032
Like
Save


Comments

Jarrid Taylor says:

How did you know which speed sensor was bad? Anyone?

Ben Dover says:

2:28 someone superglued the sensor into my dodge charger and now half of the thing ripped off and is stuck into the slot

Kareem Goodwin says:

Just installed a new abs control module and tried to program it with my autel scan tool but my abs light keeps blinking and its shows no codes..I'm thinking a speed sensor..would it be a speed sensor on each tire?..do you have a link where I can purchase?

n a says:

This did not HELP you need 2 show US the DULL VIDEO THREW WITH THE TRACTION CONTROL LIGHT & ABS

MOHAMMAD AL SHAIKH HASAN says:

Thanks, and simply informative.

Whats the function of this sensor in the car?

Whats the symptoms of defected sensor?

Rasool Tyler says:

Is there only one speed sensor?

Kassidy Logan’s Gacha vids says:

I just changed the two front ones on my sons 08 charger. Nothing was wrong I just wanted to change them. I test drove it and all of a sudden the check engine light came on. Had it scanned and the code was u1412 (implausible vehicle speed sensor received). I guess as the old saying goes….. if it ain’t broke don’t fix it. Maybe the new ones I ordered has a defect idk yet I’ll pull them off and install the old ones back to see if the light goes off.

martin komperda says:

Is this a 2015 + or later model ?

bigjune5000 says:

If I would have known what the problem was I could have saved over $400. Dealerships rip people off.

Jeff Mack says:

Thanks. You just saved me $300 from the stealership

BonesBoat says:

The BlueDriver bluetooth code reader will read the ABS codes on my 2015 300c. The dealer charged me $400 to replace my last one and charged more to scan it than replace it.

BonesBoat says:

Thanks for the good Video. On my 2015 300 C it was the same procedure but the connection was behind the fender liner. You need to remove one push pin to get to it. Of course I broke the pin and ordered the rear sensor not the front off Amazon ( read their listings carefully) . The wrong sensor threw a C0034-4A code. One more time with the OEM 6819998AC part. No easy floor jack lifting points on the 300 with all those plastic panels but it can be done without jacking it up and the tire still on.

Dandcwatson says:

Did you disconnect/reconnect the battery to reset the code or did it give you any problems resetting?

Ced Da Trucker says:

This video saved me $200

guillermo correa says:

Do I have to disconnect the battery??

StephonShowtime says:

Thanks for the video! I noticed that you have the car jack in the front middle. Is there a jacking point there that I’m not aware of? I have a 2012 sxt plus charger. Your answer would be greatly appreciated!

Jay G says:

Help!! I have a 2015 dodge challenger sxt, My car had abs code C0031-62 left front wheel speed sensor signal compare failure. I changed my left right wheel speed sensor and now its saying incorrect component abs code c0031-4a. I tried erasing the code but it doesnt erase it stays on

JettaGli08 says:

Do you have a link we’re you bought your part from?

Eddy Davis says:

My abs and esp lights on on would replacing all 4 sensors fix my issue?

Kristi Alexander says:

LOVE THIS VIDEO! You showed every little detail with perfect lighting & focused in on what we needed to see. Thank you so much! Helped me know what I was getting myself into beforehand.

Sp0ttie says:

Thank you this video was very instructional..really wanted to install this myself instead of paying someone

Ascap says:

Don't then have to be reprogrammed after install?

Comments are disabled for this post.