https://www.patreon.com/user?u=16550092
In this video I show how to change the front struts step by step…
https://www.patreon.com/user?u=16550092
In this video I show how to change the front struts step by step…
Comments are disabled for this post.
Never thought I would need a 2003 Chrysler Town and country strut video but this was right on time!!Big Thx to you and your team man. Keep Goinng.
I think you just saved me a couple hundred dollars. Thanks.
After replacing the strut does the car need to be aligned?
It seems to me, if you have to show someone how to take the cap off in order to be able to access the lug-nuts, the job is probably too dangerous for them to be attempting to change the struts. Just saying.
No tight and tight!
The torque is 96lbs + 90* then add some paint pen to be sure you didn’t for get one.
I learned after the tire shop over torqued my lugs. My wife was driving down to salt lake and the front left tire came off and rolled hitting a new Tesla.
I see your going a good service and helping the viewers.
The torque settings matter. In the future remember to add them.
All steps are in this video and it takes about 20min once in the air. At less that was my time from popping off the wheel till hit the ground. Be sure to get an alignment , and ask them to paint pen the bolts and verify they were torqued. Thanks for video.