Buy Now!
New Engine Water Pump from 1AAuto.com http://1aau.to/ia/1AEWP00199
1A Auto shows you how to repair, install, fix, change or replace a broken, bad, or leaking water pump. This video is applicable to the 09 Chevrolet Suburban
🔧 List of tools used:
• 15mm Wrench http://1aau.to/omq/1AXAA00010
• 10mm Socket http://1aau.to/oL5/1AXAA00017
• 13mm Socket http://1aau.to/oSS/1AXAA00015
• 8mm Socket http://1aau.to/oL5/1AXAA00017
• Ratchet http://1aau.to/o6E/1AXAA00016
• Socket Extensions http://1aau.to/oSS/1AXAA00015
For More Info visit us at http://1aau.to/h/aRX/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
this helped me so much
Would this work for a 2007 Silverado 1500 5.3 v8 ?
In addition! Wondering how much GM approved coolant you’ll need to replenish the system? I bought 2 GALLONS of concentrate and it took a little more than 1 gal. once I diluted it so in essence a little more than 2 gallons when mixed with half water!
[FYI] You will also need a 15mm socket to remove the tension pulley. What is not shown is the flushing system process and this installation came with the thermostat installed/included but if you have already changed the thermostat like I did… you will use the 10mm socket to remove/reinstall the thermostat housing on the new pump. I’ve been troubleshooting a overheating problem for a while and I hope that this is the resolution to my problem!
What is the name of the second heater hose name that is connecting both hoses together
Great video. I feel like if I was that deep in the game I’d just slap on a new alternator and serpentine belt while I’m up in there
Thank you for the video. Saved me some money!
So is it chain . serpentine. Or belt driven because im confused as to why i get 3 options. They all look the same.
Good video thanks help a lot
Is this the same setup as 2007 GMC Yukon Denali 6.2
Is it true about the comment below about some sort of grease on the gaskets and tape on the bolts just so I know because I'm changing out my water pump tomorrow dont want to make that mistake please reply as soon as possible thank u 1A Auto Parts love the videos they always come in handy please reply soon tho dont want to make that mistake
The camera person gets credit too.
Great video but I did it myself and the engine over heated, so I took it to Goodyear and it cost my dad $536 to fix it. They told us that they're has to be some grease on the gaskets and some kind of tape on the screws so that it doesn't leak through the screws which isnt in the video. They said I did a great job with everything but I just missed some things. Also I put in a brand new thermastat and it didnt work
Is there any harm in leaving the coolant higher than the line?
nice video. how would i know if my pump is failing?