How to Replace Strut Assembly 07-13 Chevy Silverado

How to Replace Strut Assembly 07-13 Chevy Silverado

Buy Now!
New Shock & Spring Assembly from

🔧 List of tools used:
• Pry Bar
• 15mm Wrench
• 15mm Socket
• 18mm Socket
• 22mm Socket
• Trim Tool Set
• 1/2 Inch Breaker Bar
• Ratchet
• Socket Extensions
• Torque Wrench
• Floor Jack
• Hammer
• Jack Stands

For More Info visit us at

1A Auto shows you how to repair, install, fix, change or replace a broken, busted, bad, loose, or strut assembly. This video is applicable to the 07, 08, 09, 10, 11, 12, 13 Chevy Silverado

While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.



1OlBull says:

I did not have to remove the sway bar links because I disassembled both sides at the same time. This way most of the spring tension is relieved on the sway bar. Worked for me…

Nick’s knuckle breakin’ fixin’ channel says:

Love this website. Will never walk into a auto parts store again unless in need of a part right away

Comments are disabled for this post.