Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASFK04510
1A Auto shows you how to repair, install, fix, change or replace failing, rusted, rotted, or damaged control arms with ball joint. This video is applicable to the 07, 08, 09, 10, 11, 12, 13 Chevy Silverado
🔧 List of tools used:
• 15mm Wrench http://1aau.to/tfG/1AXAA00010
• 18mm Wrench
• Complete Metric Socket Set http://1aau.to/tgd/1AXAA00043
• Grease Gun
• Pickle Fork
• 1/2 Inch Breaker Bar http://1aau.to/thi/1AXAA00078
• Ratchet http://1aau.to/tuc/1AXAA00016
• Socket Extensions http://1aau.to/tyq/1AXAA00015
• Torque Wrench http://1aau.to/tqb/1AXAA00044
• 15/16 Inch Wrench
• 8mm Allen Wrench
• Hammer http://1aau.to/tiA/1AXAA00091
For More Info visit us at http://1aau.to/h/YS/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
How did the truck get all that rust?
I need to ask I put new lower and upper control arms along with ball joints etc etc to my 2000 Chevy Silverado 1500 series when do I tighten everything to spec do I just snuggle up and then wait until tires are back on and lower the vehicles to its original setting and then Jack the truck up to torque it down with the specs? Could somebody please help with this answer thank you very much and great videos
Nice .. the training i get from there videos!. is a bonus to them.. as ive ordered 3 times from them . and have Fixed 3 things on my Truck "2010" The Count is 3/3 . and since im commenting on here.. might be looking to order a control arm. due to a missing Nipple!
Thank you so much for all your videos, a mechanic was charging me so much when i could do it myself but didnt have the time. But i looked into the proper tools i needed;… "since i dont have them just laying around my shed" for this kind of work and came across your vids. They are so helpful, thank you very much. Look forward to shopping online for parts as well from yalls website, big difference on local pricing just have to wait to recieve them. Thanks again.
What's easier to do?
How do you know whether to replace just the joint or the entire control arm?
Thanks for the video. I didn’t see you grease the LBJ did I miss it?
Is this the same or similar process on a 2003 model?