Buy Now!
New Ignition Lock Cylinder from 1AAuto.com http://1aau.to/ib/1AIMX00157
The ignition lock cylinder provides security by requiring a key to start your vehicle. If there are problems with the lock cylinder, you’ll have trouble starting the engine! This video shows you how to install a new ignition lock cylinder on your 1994-2004 Chevy S-10.
• Check here for more videos on the 1994-2004 Chevy S-10 http://www.youtube.com/playlist?list=PLJVpHWuCEUX-xoyB0wW3YOp2CZsZDCkBv
This process should be similar on the following vehicles:
1994 Chevrolet S10
1995 Chevrolet S10
1996 Chevrolet S10
1997 Chevrolet S10
1998 Chevrolet S10
1999 Chevrolet S10
2000 Chevrolet S10
2001 Chevrolet S10
2002 Chevrolet S10
2003 Chevrolet S10
2004 Chevrolet S10
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oabq/1AXAA00013
• Trim Tool Set http://1aau.to/oxQ/1AXXX00006
• Ratchet http://1aau.to/oahu/1AXAA00016
• Socket Driver
• Socket Extensions http://1aau.to/oaaX/1AXAA00015
• Pick http://1aau.to/opK/1AXAA00037
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Chevy S-10 2nd Generation 1994-2004: https://www.youtube.com/playlist?list=PLJVpHWuCEUX-xoyB0wW3YOp2CZsZDCkBv
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
This is how you do it on the pre facelift models
1. Remove plastics on top and bottom behind steering wheel
2. Turn key all the way then push the tap down while pushing out on the old cylinder
3. Once you get the cylinder out a little ways pry on it with a flathead or something while removing whatever you used to push the tap down with in step 2.
4. Once you have the old one out reinstall top and bottom plastics
5. Insert new cylinder and turn key back to off position and you're done
Any know what size the inverted screw size is?
94 GMC Sonoma is way different than that
what do you do if your ignition won't lock in place to put the new key cylinder in. please help
how to reset ignition switch
What if my steering wheel is locked and can’t get it to loosen so that I can turn my key over ?
Thank you so much for this detailed video, I was able to change out my ignition in 30 minutes, and I am not car savvy lol. You saved me money by doing it myself much appreciated!
Can someone refer me to a video showing how to replace door lock cylinders on 2003 chevy S-10 ?
Great video
what size is that tork head
1996 is different. the cover does not split around the key. the top cover goes down and around the key lock.