Buy Now!
New Window Regulator from 1AAuto.com http://1aau.to/ib/1AWRG00001
Most power window problems can be traced back to either the regulator or the motor that drives it. TRQ produces affordable window regulators and motors that are designed specifically to fit your vehicle! This video shows you how to replace both the window regulator and the motor on your 1999-2007 Chevy Silverado.
• Check here for more videos on the 1999-2007 Chevy Silverado: http://www.youtube.com/playlist?list=PLJVpHWuCEUX9UxfAHgxfkoYJPq4Q1iy4k
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
Thanks, this video gave me the confidence to finally fix my window after 2 year in my 2003 chev silverado!!
excellent video, thank you.
This is different from my 2002 Silverado.
Super easy video to follow. I had someone to replace my regulator for me only to find out they either did something wrong (which I doubt) or the part I bought was no good…bought a second regulator and replaced it myself after I spent more money thinking it was the switch sense I had just replaced the regulator…long story short had I done it myself the first time I could saved 300 bucks and not rode around with window taped up for almost a month. Thanks for the east to follow video.
That was a big help thank
You saved my bacon today. The window regulator broke on a rainy night. I was able to replace it the same night thanks to your video and O’reillys being open late.
Don’t pop the door lock switch up like he does. There’s a small screw from underneath that holds it to the door panel. You have to remove the door panel with the switch still attached and then disconnect it from the back once you have the door panel loose.
My window fell
I seem to have a tough time putting all the way up so that I can complete the task of changing the chassis
H E L P!!!!!!
Just bought new windows and regulators. This should be easy.
Another thing.. You really don't need to remove the window switch at all. Remove panel disconnect wires. Also loosen your window clamp bolts before you install regulator. Haven't done mine yet but we can all use this video as a what not to do.
Guy when you yanked up the window switch you pulled the screw right out. Thanks for that btw. Just pry it up he says. Donkey
My wife has a stinky hooky doo
Thank you, thank you, thank you, ordered a motor last summer, finally had time to research and replaced it in 20 minutes! Thank you for all the information!
My window is stuck in the down position. Am I going to be able to get the bolts out?
Lmao I see now what my mechanically inclined son said it's too difficult to take the door apart. This will prob take me an hour or two just to take this off. Ugh I hate being broke
I followed all of ur instructions, the window was working once I put it in. Now the window won't work again. What's ur thoughts?
I love this guy! The 'hooky-doo' is now officially in my vocabulary box.
Thank you very much with your help I made mine clear and easy!
Thanks! You took the guess work out of it for me
I need just the bolts should I just go to a junk yard or try to match them somewhere?
well done… i have one on the way…this will make job easy.. thanks
Super helpful video. Followed the instructions and had my driver side window working like new.