How to Install Blower Motor Resistor 07-14 Chevy Suburban

How to Install Blower Motor Resistor 07-14 Chevy Suburban

1A Auto shows you how to repair, install, fix, change or replace a bad or broken blower motor fan speed resistor. This video is applicable to the 09 Chevy Suburban

🔧 List of tools used:
• 7mm Socket http://1aau.to/okE/1AXAA00017
• 7/32 Inch Socket http://1aau.to/op/1AXAA00018
• Ratchet http://1aau.to/oqY/1AXAA00016
• Socket Extensions http://1aau.to/onH/1AXAA00015

For More Info visit us at http://1aau.to/h/KG/

⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

116,640
Like
Save


Comments

1A Auto: Repair Tips & Secrets Only Mechanics Know says:

Watch the Video
Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
Do it Yourself
Save Money

Punkin_Pie says:

Man this guy is trying to charge me $100 to replace my blower in my truck.

Brittany Honig says:

Does anyone happen to know the location of the resistor in a 2016 suburban? I can’t find anything online, and it’s not in the same spot as this video.

scumbagrog says:

is there a video on how to replace connector?

John Moreno says:

Where is the blower motor resistor located on a 2014 GMC Sierra SLE 1500?

Major Skillz623 says:

Do you disconnect the battery

Acres ninety says:

My front blower on my 13 denall wont blow at all. Would it be resistor or blower motor?

Robert Owens says:

What year model is that truck!!!!!

Brand Maxxiçeu says:

My blower motor will not turn off. When i turn it off when put the new one n

Rick Branstetter says:

On a 2012 Silverado that's not the way the blower resistor comes out it's totally different

Taz Khan says:

2013 tahoe lt
My middle row and back seat get no airflow but the feet theres air..i opened the rear and theres no blend door actuator just a resister ? Could that be my problem ? I hear the air turn on hot and cold..just doesnt go up to top vents. But i open rear panel and theres no blend door actuator just a resister? Btw 2013 tahoe lt ???

The one u replace in video is the one i believe for passenger..driver side is right on top of gas pedal 2 the right..

datatech2000 says:

My same problem was the connector going into the blower motor. The pin was burned to a dark grey on the blower side connector on the back of the blower motor. Replaced jumper wire from resistor module to blower motor. Been working without a problem for over a month. Good thing to, cause we are having a heat wave here in California. Good Luck hope this helps someone.

Tx Outlaw says:

I have a 2010 Tahoe and after about an hour driving, the air vents become blocked and don't blow air as much as in the beginning?

Kin Kampawa says:

It's easy to install, but how do you diagnose the problem, i had to take mine to auto electric shop, because none of the videos on YouTube helped me, and i didn't wanna spent on parts that i didn't need.

Chukwuemeka Onyema says:

2 times since ownership my blower in front stopped working but rear still works. I disconnected harness both times and sprayed with MAF cleaner on both ends. Everything works afterwards. Suggest trying this before replacing to buy yourself some time but I think resistor is around $30 and probably worth just replacing.

Comments are disabled for this post.