How to Replace Front Lower Control Arm 08-14 Cadillac CTS

How to Replace Front Lower Control Arm  08-14 Cadillac CTS

Buy Now!
New Control Arm with Ball Joint from 1AAuto.com http://1aau.to/ia/1ASLF00777

Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear, as well as integral ball joints that also wear. This video shows you how to install a new quality TRQ lower control arm in your 08-14 Cadillac CTS. The procedure is the same on either side of the vehicle.

• Check here for more videos on the 2008-13 Cadillac CTS: https://www.youtube.com/playlist?list=PLJVpHWuCEUX9dKMnILI4rUfiAQQ9cAmdk

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

2,859
Like
Save


Comments

Sascha Newberry says:

What is considered ride height?

If I go with aftermarket polyurethane floating bushings, is torquing at ride height still necessary?

Dominick Ray says:

This is an awd one right does not.look the same as my red ones

t [kmaron] NG says:

Cant replace just the bushings? Or need to replace the whole arm

Comments are disabled for this post.