This video goes through the steps for attaching a front license plate to your vehicle and it is a product review for this silicone license plate frame. It came with everything needed, so the job was super easy.
Things you will need for this job:
Shop towel: https://amzn.to/35WJbhg
Silicone license plate frame: https://amzn.to/324qasd
Screwdriver: https://amzn.to/2TFSYmi
Drill (optional): https://amzn.to/3jQvvcG
If you need to drill some holes:
3/16 drill bit (if you need to drill a hole): https://amzn.to/3mIBfqM
Drill bit set: https://amzn.to/2HQAKvV
The steps were:
1) Wipe down the area.
2) Put your license plate into the silicone frame.
3) Put the black screws through the clear washers.
4) Line up a screw through the hole in the license plate and in the bumper.
5) Get the screw started in the hole (2-3 rotations).
6) Repeat steps 3-5 for the other hole.
7) Work the two screws together, tightening each one a few turns before moving to the other one.
8) Check that it is firmly attached.
9) Enjoy your new license plate!
){kind=link}
Would never drill into my caddy it’s a 2013 caddy ats it’s priced from a dealership at 26 thousand dollars and didn’t come with a bracket or or the holes good luck ppl
Having a license plate bent at the top but not at the bottom would drive me crazy. I would probably want to put bushings in front of the bumper and behind the plate so that everything was square.