How To Install A Charge Pipe On A BMW 335i And First Impressions/Review! [DIY]

How To Install A Charge Pipe On A BMW 335i And First Impressions/Review! [DIY]

-Hey Everyone, This is a comprehensive guide on installing the xspower / xs power charge pipe as well as a review towards the end.

DV port cap – https://goo.gl/8dcz3P

Thanks for watching, dont forget to subscribe to stay up to date. Let me know what you think down below.

3,448
Like
Save


Comments

Benjamin Filincieri says:

Hey bro great video really appreciated it but…. you never sent the link for those plugs ? Can ypu let me know where ypu got them?

Ricardo Roache says:

What engine is this N54 or N55?

Jeremy Cribb says:

Out of all the videos on this model of car, this was probably one of the best play by play videos. You certainly highlighted all the things one would encounter with this job.

Nosgoth of Kain says:

OK, so I replaced my CP today and I watched many video tutorials and want to say that by far yours was the most detailed one. Thank you.

I did manage to break the MAP sensor clip "wire clip" but it still attaches back so no harm.

The grey twist connectors that you mentioned in your video and might be difficult to take out were tricky. You just twist with a wrench "not by hand" and all is good. I used my non-hulk hands with no results.

I did have some oil in my charge pipe and sensor. You mentioned that it could be a sign of turbos going out. I googled it and it seems normal to have a little oil like you had, so don't worry about your turbos.

Nosgoth of Kain says:

Very informative video and I love your commentary and funny captions.

Tui Wilson says:

That old chestnut

wrenchmaster87 says:

Manifold absolute pressure

CDMusicGroup says:

Great explanations and red circles. Thank you

Tommy Stechyshyn says:

Sounds like a diseal lmfao

Write a comment