Buy Wastegate Rattle Repair Kit: http://turbolabofamerica.com/bmw-135i-535i-335i-turbo-wastegate-rattle-repair-fix/
Buy TDO3 Turbo Rebuild Kit: http://turbolabofamerica.com/bmw-n54-…
BMW TDO3 Billet Wheels (Machining Required) http://ebay.to/1RehMH9
BMW TDO3 335i 535i 135i N54 Blog Post http://turbolabofamerica.com/bmw-335i…
BMW TDO3 Turbo Rebuild Kit Blog Post : http://turbolabofamerica.com/bmw-n54-…
since you did like a 100 of these, how long are you taking to do one turbo in hours
use a bolt with 2 nuts and a 13/16 socket to press the bushing out wish it would work to install the new ones
So is this a temporary fix?
i have the same problem with my big Turbo but on 535D. on the big switching flap.
i have the same problem with my big Turbo but on 535D. on the big switching flap.
having a hell of a time pounding the old bushing out, got any suggestions?
What steel is used for kit ,is it better/stronger than orginal.
great video, thanks. I have ordered your kit for the waste gate rattle fix, have yet to install. I do have a question, how did you properly adjust the waste gate once re installed, flush with flapper closed or flush plus # of turns?
Can anyone tell me if the turbos on the e90 335i N54 is different than the pair found on the e60 535i? I can't believe no one has a straight answer…and if they are different, what is the difference? Thanks
i bet he smokes weed or som stff like that , but he did well =)
I've done the wastegate fix, thanks. I have a question about the position when reassembling. Does the wastegate close under boost? I tightened the arm to the closed position then realized that the actuator only pulls but does not push.
Hi I work on European cars and I'm starting to hear issues with N54 engines but what I'm more familiar with is the turbocharger for the gen 2 Audi A 4 or the A5 or the Q5 it seems like they have the same failure I was wondering can you get the same part that you replaced but for let's say a 2009 Audi A4 with the 2.0 litre turbo engine I think the Turbo is made by IHI but nor sure I know it's not a KKK or Borg & Wagner let me know if you can get the part or the complete turbine housing .
+Turbo Lab America for the wastegate rattle fix, do i have to buy both the repair kit AND the TD03 kit?
What size drill bit did you use to drill out the bushing pin?
does a defective wastegate affect the perfomance of the car? would it produce less hp and tourqe?
What's the price for u guys to do this on both of my turbos?
the ones on my car are bad….. the rear i think is open and not closing no more since i have a very bad lost of power and that rattle sound when i accelerate in idle.
what would be the benefit of having BMW TDO3 Billet Compressor Wheel install?
I wonder how much for the fix on two and what's the turn around? Like how long would I be without me car?
If you guys want to see the results of this fix go check out my videos on my page!
thanks for sharing with us,,
respect
where are you located
you have 2 sets rattles?
give me your mail or phone
Out of stock
Hey. where you can buy a kit?
Hey dude, you would be a god if you fixed this for the M5/M6 plateform. I can probably get you 200 sales in 24hours.
I like this project, but I have the same question that how much should I pay for taking off of my turbos and put them back on? Does anybody has experience with that?