Project B8.5 Audi S4 Air Intake DIY (IE)

Project B8.5 Audi S4 Air Intake DIY (IE)

We show you how to install the IE intake (link below) on our B8.5 Audi S4 project car. Intakes are a great way to get more free flowing air and better throttle response. This intake will also help you get more supercharger noise out of your Audi 3.0t engine.

IE B8 and B8.5 Audi S4 | S5 Intake
https://www.shopdap.com/ie-audi-b8-b8-5-s4-s5-cold-air-intake-ieincg2.html

Plastic Cowl Rivets
https://www.shopdap.com/4d0-807-300.html

Grommet for 3.0t Audi Intake Air Box
https://www.shopdap.com/8k0-129-669.html

Tools Used during this Install

8pc Magnetic Screw Drivers Set
https://www.shopdap.com/8-piece-magnetic-screw-driver-set.html

Torx Bit Set
https://www.shopdap.com/vw-audi-torx-sockets.html

——————————————————————————————————

More info on DAP Reward Credit
https://shopdap.com/store/rewardpoints/index/policy/

Shop for VW and Audi Parts Here
http://shopdap.com

Check out our VW/Audi Shop located in Cornelius NC
https://www.daprepair.com/

38,680
Like
Save


Comments

David Newman says:

Hi.. looking to flash my 14 S5, and thought this would be best to do beforehand..will this be ok in colder areas/bc canada .. thanks

Juan C. Guarin says:

How about the MAF?

Daniel Varela says:

Pretty expensive intake to have a rubber/Silicone tube πŸ™ .. HPS has a sick intake almost $100 less

RUSSELL PEOPLEMAGNET says:

do you see the need to change the throttle body also.. seems like they both go together..

Osvaldo Arias says:

B8.5 what year s4 is it?

Alexandru Apavaloaie says:

I heard this could also be installed in 3.2's as they have similar or exact mounting spots. Got an '11 Q5 3.2 and was thinking if this would make any sense πŸ˜€

Abe Ibrahim says:

Hi, Great video – One question: Where did you place the Air Mass Sensor or the 3.0L TFSI engine does not have one? if it does have one, where is it located, Thanks!

yoshi1015 yoshidiman says:

Great video but the link to buy the intake doesn't work

Michael Koo says:

Man….I really need to hear this in person before I buy it. The sound might just be obnoxious.

Jalen Pambid says:

Also Can you leave the stock air intake cover connected? (The stock airbox)

Jalen Pambid says:

Check engine light/any problems after intake install?

Layne Fischer says:

Where do I get the iE intake from ???

paul l says:

sounds like an electric motor. I would rather keep my stock S4 intake.

ginzo 7 says:

I just hate the sound that intake makes

jj says:

Can you just buy a performance filter cone and just attach it to the factory intake tube?

Christopher Lloyd says:

Thanks for the video! Helped me do my install.

Shivam says:

Would this intake work on a 2012 Audi A7?

Stan Cousins says:

wanted to do this on my C7 A6 3.0 but there is no kit πŸ™

Kiss Kiss says:

Do you need an type of engine management correction for this intake? ie.. Remapping? Also, does the silicone hose which goes into the TB have a nipple for the vacuum hose you removed from the Original accordion hose?

vijay car technology says:

Sir engine overall ka video

Aviation Direction says:

13:54 Doesn't look like you have to take the trim or duct parts off at all.

Yaimdan says:

literally had a heart attack thinking all those screws were going to fall in the engine bay once you flipped the filter box upside down

CHACE NGUYEN says:

Hi D.A.W.. i been trying to find a downpipe resonator in 2.5 or 3inches.. pretty much the mid section of my exhaust from the cat back.. i cant find anyone who sells it for a 2004 audi a4 1.8t b6 quattro 6 speed manual. Can u help me find the upgrade replacement?

Comments are disabled for this post.