Buy Now!
New Sway Bar Link from 1AAuto.com http://1aau.to/ia/1ASSL00134
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 02, 03, 04, 05, 06, 07, 08, 09 Audi A4
🔧 List of tools used:
• 13mm Wrench http://1aau.to/oqR/1AXAA00010
• 16mm Socket http://1aau.to/oaac/1AXAA00015
• 17mm Socket http://1aau.to/oaac/1AXAA00015
• Ratchet http://1aau.to/oarq/1AXAA00016
• Socket Extensions http://1aau.to/oaac/1AXAA00015
• Rust Penetrant
• Floor Jack http://1aau.to/ovy/1AXAA00068
• Jack Stands http://1aau.to/ovQ/1AXAA00065
For More Info visit us at http://1aau.to/h/bsJ/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Visit-1AAuto
√ Do it Yourself
√ Save Money
Do you know the sway bar bolt size?
6 point is better then a 12 point. Even the open box end. Alot more holding the bolt then a 12 point.
why didn't you just leave the bottom bolt on to keep it from spinning….?
The links are supposed to be torqued under curb weight…
that was nice n easy to follow thanks
why is it that you can't raise the car unevenly and replace one link at the time?
love You guys so easy thanks