Car Fix DIY Videos

This video outlines the process for replacing & recoding the battery on a 2013 C7 Audi S6.

This information is provided to you to use at your own risk.
You should always consult your owner’s manual, the manufacturer’s web site
or service department. Also please refer to the Ross-Tech web site
to ensure the proper recoding process for your car.

00:01 – Introduction
00:36 – Disclaimer
00:56 – Opening Title
01:02 – Required Hand Tools
01:15 – Other Tools Used in This Video
01:55 – Remove the Spare Tire Cover
02:27 – Remove the Spare Tire
02:41 – Remove the Tool Kit
03:23 – Relocating the Pressure Accumulator and Removing the Battery Bracket
03:54 – Removing the Battery Clamp & Battery Covers
04:26 – ***OPTIONAL*** Connect 12v Power Source & Memory Saver
04:54 – Disconnect the Battery and Drain Tube
05:24 – How to Find the Battery Energy Management (BEM) Code Sticker
06:15 – Putting it All Back Together
07:50 – Recoding the New Battery
10:06 – Thank You. End.

Links to the tools and products used in this video (These are not sponsored in any way):

Duralast Platinum AGM Battery H9-AGM
https://www.autozone.com/batteries-starting-and-charging/battery/p/duralast-platinum-agm-battery-h9-agm-group-size-h9-ln6-950-cca/229889_0_0

Ross-Tech VCDS® HEX-V2® Enthusiast USB Interface
https://store.ross-tech.com/shop/vchv2_ent/

NOCO 12 Volt Plug Socket with Clamps
https://www.autozone.com/test-scan-and-specialty-tools/battery-charger-cables-and-accessories/p/noco-12-volt-plug-socket-with-clamps/702664_0_0

Schumacher OBD II Memory Saver Cord
https://www.autozone.com/test-scan-and-specialty-tools/memory-settings-saver/p/schumacher-obd-ii-memory-saver-cord/220034_0_0

Ross-Tech Battery Coding Process for UDS Cars
https://youtu.be/IJAScg6JrYI?t=284

Full Ross-Tech Battery Coding Process
https://youtu.be/IJAScg6JrYI