Check out the 4UATTRO SHOP for official merch!
https://www.bonfire.com/store/4uattro-shop/
https://www.patreon.com/4uattros4
Timing the freshly put together 2.7t for my b5 s4
We are setting the timing for the cams, and crank as well as installing the cooling and timing accessories.
Follow on instagram for daily updates on the build @4uattros4
Please comment with any questions.
Thanks for watching!
Sir do you have any of these specialty tools used and for sale?
This guy is an AUDI-GOD!!!!!!!!!!!!
Thanks again for your videos, my son's B5S4 stage 3 is going back together! Rebuilt K04's from Tim's Turbos and all new parts! Your videos are awesome.
Great video. I just blew my timing belt. I usually take it to a shop to do the timing but id rather save the money and do it myself and this video will definitely help! Thank you!
Also how would i know if my valves are bent….my engine threw timing
so if I pull good cams out of a Junker and put it on my car and time it….it should be all good right??
-Car Newbie
This Guy ROCKS!!!!!!! 4UATTROSA
my car the timing belt is off the two large holes are not lined up how do I line everything up ;;all the videos show with the timing belt on
Might sound like a dumb question here, but I have a stuck open thermostat. There is no way that I can replace the thermo without taking my timing belt off correct.
I only ask this cause my timing belt was just replaced 20k miles ago grrrr.
wow dude very good
Can I do this with out removing the motor ?
Great video. Same procedure for a 05 A8 4.2?
Thanks for advice
Did the audio cut out for anyone else from 4:15 to 6:38? Not sure why, I thought it was my headphones.
4:15–6:30 no sound
Sound cuts out at 4:04. Don't think it's my computer.
Can I do this with motor in situ?
Thanks for the video. My allroad has 240k on it. This will be my first attempt at completing this job.
Great explanation.
You earned a Passat fan in your channel.
Where did you get your spider hose assembly from bro??
reliably how much boost can you run on an auto w/ stock turbos
What timing belt kit do you recommend? Just got an Audi allroad and the last owner didn't even know what a car was, so I need to get the maintenance squared away and I was just curious if you recommend like ECS or some other kit?
Hey…
Thanks a lot for the video. I ve got two questions,
45° counter clockwise the crankshaft? At 6:10 you say 75°.
Do you have a partnumber of that bolt/ plug wich closes the lockpinentry? Here in Germany you only got a plastic-part with an o-ring.
Thank you Bro
Great vid, nice, calm presentation. Was glad you installed the crank pin, wasn't sure that was going to happen. Hope you turned the engine over by hand a few times and rechecked your marks.