This video demonstrates how to install a set of Spyder Auto projector headlights on 1994-2001 Acura Integra vehicles.
This video demonstrates how to install a set of Spyder Auto projector headlights on 1994-2001 Acura Integra vehicles.
You must be logged in to post a comment.
What is the visibility with these headlights are they better than original
ones ???
SPYDER AUTO INSTALLATION: 1994-2001 Acura Integra Projector Headlight
@migue2255 the part number is pro-yd-ai98. Try looking again on spyderauto
how do you hook them both up?? i just bought a 94 acura and it has those
headlights.. but only the far ones on both sides are hooked up?, and the
ones closer to the center of the bumper are still the stock lights..
be wary of a car that comes with pre-installed mods unless you know the
modder personally, and even then it’s iffy… I’ve been the sufferer off
sorting out other peoples projects when buying cars like that- just know
what you’re getting into…
I just ordered these halo headlights. What needs to be done with the 4
wires on the bottom (2 red & 2 black) when installing?
thats fucking dope. where can i get these headlights?
For how much money did u buy them for and where
@RyuTakezaki1 Hi, sorry to hear that your didn’t come with low beam bulbs.
What you can do is request a set from the company that you brought it from.
thank you have a good day.
Nice looking ligths
thanx Alot
And are those chrome or black ones?
mine didn’t come with any lowbeam bulbs, just the two headlights with the
highbeams already installed I put my stock lowbeams in, and they don’t have
the different tint on them like the ones in the video appear to have. But I
suppose those are just minor things compared to how much better the light
source is now, plus the angel eyes look so nice.
We do not sell stock headlights.
@cd3playerc these lights are PRO-YD-AI94-HL-C they are chrome
okay question. Can i use my LOW BEAM HID kit on this thing? and can i
switch out the HIGH BEAM lightbulb later?
hey I got these same HALO headlights. What bulbs or HID kit would u
recommend for a good light output? I’ve tried regular halogens and Xentec
6000k’s. .the cut off is not that great. .but from from Integra forums.
.they say this brand of Halos are the best. .so it must just be the bulb
i’m missing. .cuz the highbeam housing works great. .just like the stock
headlights. .so i figured the lowbeam housing should have the same build.
What website can I get those from and what are they exactly called?
Is there a link where you can purchase this?
spyderauto = “The low beam will use the stock bulb size (9006) for the high
beam it will be a H1 bulb. We recommend using an 35 watt HID kit.” hey is
the H1 bulb same as 9005? cuz i thought the high beam was 9005 size.?? let
me know, cuz im planning to hid both also
Try adjust the Low beam first because that can be the problem of not
getting enough light output. If you are going with HID’s we recommend
sticking with a 35 watt kit because 55 watt kit is too hot and it will melt
the lens.
@FredyLazo thank you.
@nparr1991 You will have to wire your Halo/CCFL wire in to your parking
lights in order for them to work and that is pretty easy we have a video
for that in our channel.
I should probably add here, that you should use a 35w or lower HID kit as
we’ve heard that higher wattage HID systems don’t do well in our lights –
just be sure to use the correct size HID retrofit bulb for the projector
housing if you do in fact plan to use HIDs in them.
so theres no other splicing to be done, just unplug and plug? is it the
same for a 95 with a 98+ front bumper/headlight conversion? also, do you
guys make turn signal kits?
depending on application and your preference… usually projectors will
come with bulbs preinstalled, but do be sure to check that you do not need
to transfer anything over, as often you’ll need to transfer corner light
bulbs etc.
@spyderauto i searched it up but i have another question. Do the headlights
fit 94 inegras to 01? or are the headlights different sizes?
Can I buy those stock headlights?
Oem is better
@dillon14dj Hi, these lights comes in a set the HIgh and low beam are 1
piece, First check to see if the sockets are connected. Second check to see
if the fuse is blown. Third check to see if the bulb is blown
very nice
@cd3playerc they were the stock ones that came with the lights.
they selling me a Acura for 1600 should I buyit? comes with everything
besides coilover shocks & A/C – included 150k with 17inch rims & leather
seats 97 model
The rings will require you to wire them. how they come on depends on where
you wire it to draw power from ie.. if you wire it to your parking lights
it will come on when you parking lights are on. SEE OUR OTHER VIDEO
REGARDING HOW TO WIRE HALO/CCFL/LED
Sick ride. what brand of low lights are those? What color are they?
Yes, you can run HID on the high beam and low beam. You will just have to
get 2 HID kit. The low beam will use the stock bulb size (9006) for the
high beam it will be a H1 bulb. We recommend using an 35 watt HID kit.
your HID kit will probably fit and function however the lights are not DOT
approved for use with HID and are not warranteed for use with HID, but
it’ll probably fit, and it’ll probably work.