How to Replace Front Stabilizer Sway Bar Links for Acura & Honda Accord

How to Replace Front Stabilizer Sway Bar Links for Acura & Honda Accord

Hi guys and welcome.
sorry I made a mistake at 1:23
if you have a car like mine over 17 year old you need to change your sway bar links there not very expensive and is not difficult to install, and I very happy for the new end links because they are stronger that the stock part.
Please let me know if you have questions on this installation.
Thanks for watching and don’t forget to Subscribe.
Camera that I use for this video Sony RX 100
————————————-FOLLOW ME—————————-

Follow me on Instagram
@bulletsolano36
Follow me on Twitter
@bulletsolano
Like my Facebook page
https://www.facebook.com/luis.b.solano.3
Thanks for watching.

7,233
Like
Save


Comments

Mecias Rivera says:

Bullet I have a question is there a difference between a stabilizer link sway bar link and bushing link

Robert Nardello says:

thanks my dude, appreciate the tutorial.

Jerry Garcia says:

Great job as you stated "make it easy for me" Thank you…. Do I need to take the vehicle in for a front end alignment after the replacement?

Carlos Sanchez says:

Great video like always

Vince Del Fabbro says:

Nice videos bro. I have a 98 accord so your videos relate to my issues a lot. I'm having a hard time with my front end suspension noise and not sure where to start but it looks like you're replacing damn near every suspension part

Gene Friedman says:

Hi Bullet, this video helped me a great deal. It is really well made. The pictures are clear and you have great advice using the vice grips. I got worried when the ball joint spins when loosening the nut. I thought I would have to cut it which is a pain in the ass. But the Honda link comes apart real easy with a hammer and pry bar – those 4 little buttons on the back of the link is actually plastic – just break them right off. Then I just use the vice grip on the ball joint like you. Thanks again for uploading this.

Mak933 says:

What's the recommended torque spec when tightening these?

Noel Alegado says:

Hi, thanks for the video. What is the brand of link that you installed. I have a 2001 accord lx and planning of replacing the front sway bar links.

Atif Butt says:

Hi bro my Honda accord 2000 misfire. 3000 rpm plz help me

Reply to Atif Butt Cancel reply