Buy Now!
New Coolant Temperature Sensor from 1AAuto.com https://trq.video/ib-1ATSU00037
This video shows you how to install a new coolant temperature sensor from TRQ on your 2007-2013 Acura MDX (3.7L V6). The coolant temperature sensor sends important information to your vehicle’s computer to manage the efficiency and safety of your vehicle’s engine. A failed sensor could cause damage or overheating.
Estimated installation time for a professional technician is approximately: 54 minutes
This repair was done on a 2011 Acura MDX Base 3.7L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2007 Acura MDX
2008 Acura MDX
2009 Acura MDX
2010 Acura MDX
2011 Acura MDX
2012 Acura MDX
2013 Acura MDX
Tools you will need:
• Flat Blade Screwdriver https://trq.video/obWt-1AXAA00013
• 17mm Wrench https://trq.video/oark-1AXAA00010
• 10mm Socket https://trq.video/ob4I-1AXAA00017
• 17mm Socket https://trq.video/ocyG-1AXAA00015
• Ratchet https://trq.video/ocyP-1AXAA00016
• Torque Wrench https://trq.video/obz7-1AXAA00044
• Brake Parts Cleaner
• Bungee Cord
• Gloves https://trq.video/obM2-1AXSS00048
• Safety Glasses
• Drain Pan
• Wheel Chocks
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
){kind=link}
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
It would be nice to point out where is the coolant sensor is located based on the system logical order and not just point out the location.
For example. You can say something like the coolant sensor is located up steam or downstream the radiator before it goes back in the radiator. It sometime like that.