Car Fix DIY Videos

It is time for new brake pads on your car, and you want to do it yourself.
This is front brake pads replacement DIY. Hope this will help!
***Please read your owner manual instruction to raise the vehicle, remove the wheels safety and torque specs for your specific vehicle!
***Note: Some missing information –
– Doing the other side similar
– After the brake pads replacement is done. Installing the wheels and torque the wheel lug nuts to specs according to your vehicle manual.
– Pump the brake pedal multiple times with the engine off to check for brake pedal pressure firmness. The pedal should feel firm after three to five pumps.
– Start the engine and press the brake pedal again to make sure it does not go all the way to the floor, if it does, then it has air in the system and need to bleed the system.
– Test drive the vehicle slowly and apply the brake to check for the vehicle stop safety.
– This is DIY instruction. Perform it at your own risk. Please note that I hold NO responsibility for any damages or incidents of the work!
– Thank you for watching. Hope this is helpful for you!
– If you have any question or comment, I will get it answered to my best knowledge!