Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com http://1aau.to/ia/1APBS00102
Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes. This video shows you how to install new, quality TRQ brake pads and rotors on your 2014-2020 Nissan Rogue.
• Check here for more videos on the 2014-20 Nissan Rogue: http://www.youtube.com/playlist?list=PLJVpHWuCEUX_YTGP_0d6UNZCkrOAJK9jZ
This process should be similar on the following vehicles:
2014 Nissan Rogue
2015 Nissan Rogue
2016 Nissan Rogue
2017 Nissan Rogue
2018 Nissan Rogue
2019 Nissan Rogue
2020 Nissan Rogue
Tools you will need:
• Flat Blade Screwdriver http://1aau.to/oeV/1AXAA00013
• Pocket Screwdriver
• Pry Bar http://1aau.to/oa4/1AXAA00020
• Torque Wrench http://1aau.to/ocD/1AXAA00044
• Brake Grease
• Copper Anti-Seize
• sanding disc
• Floor Jack http://1aau.to/obi/1AXAA00068
• Wheel Chocks
• Wire Brush http://1aau.to/oZ/1AXAA00079
Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1
Check out our playlist:
Nissan Rogue 2nd Generation 2014-2020: https://www.youtube.com/playlist?list=PLJVpHWuCEUX_YTGP_0d6UNZCkrOAJK9jZ
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto http://1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
U definitely aren't a flat rate technician
Thanks for the video.. like the torque specs included and the socket, wrench sizes…
Fake video, 2019 Rogue has electric emergency brakes on the back.
The caliper slide pins are 14mm, the caliper bracket bolts are 17mm.
You make it very easy to understand. I love that you give the torque specks. You don't skip any steps and are very thorough.
give more details… like at 1:20 what size is the socket?
Great job You might be the best person that explained a break job that I've ever heard….
I was hoping you were gonna tell me the sizes of the fasteners. Nice quality vod still
I was hoping you were gonna tell me the sizes of the fasteners. Nice quality vod still
Red thread lock no no no red is permanent
Do you have a video for how to change the rotor brakes and springs on a 2018 nissan rogue s all-wheel drive
Great quality video. I have one confusion. In the front mounting bolt torque you said was 122ft/lb but in the rear you mentioned only 62ft/lb. Is it correct or any mistake from your side? Thanks
I was told something about a shims???
What was the spray you use to clean the brakes?
Man what a great video only thing it’s missing is doing the emergency brake
What if the adjuster screw is not lined up with the hole of the rotor and unable to adjust the shoes????
I had the rear pads changed recently by an auto parts and I noticed today that the Murano Advance Driver display is no longer showing the warning/notice in the display that the foot break is still on when the car is put on drive “D”. Anyone knows what might be wrong?
RED threadlocker?! Don't you ever want to be able to remove that bolt again?