In this video, I will show how to install Video Player on MAZDA MZD CONNECT Infotainement system.
Please follow this guide at your own risk. I will not be responsible for any damage on your MZD connect.
+===========================================+
INSTALLATION STEPS
+===========================================+
Step 1: Download the latest MZD-AIO-TI v.2.8.6 Installer on the link below.
https://mazdatweaks.com/
Step 2: Install the MZD-AIO-TI installer.
Once installed, Take a tour on how to use the application.
(Please take note the compatible firmware versions).
Step 3: Click the green button(left side) on Videoplayer.
(Optional: You can select additional features like Android Auto.)
Step 4: Click green button(left side) on Swapfile.
(The Swapfile will provide your system with an additional 1 GB of RAM
running from the USB drive for playing videos.)
Step 5: Once ready, Click Start Complilation. Then click Start.
Step 6: Insert your USB stick and format it to FAT32.
Step 7: Once compilation is complete. Copy the content “_copy_to_usb” folder into your USB stick.
You can also store your movies on the same USB stick. Just create a folder “Movies”.
Step 8: Copy your favorite movies on your Movies folder on your USB stick.
Step 9: Once movies are copied. Insert the USB stick on your Car USB slot.
Wait for 30-45 seconds until the Installation options comes on your MZD touchscreen.
Then press “Yes – Go On” to proceed with the installation. Then press OK.
Press OK to install Video Player.
(If you Android Auto, then click OK to install.)
Press OK to create a swap file on your USB stick.
After the installation, the MZD connect will automatically reboot.
Step 10: After the reboot, go to Applications and Scroll down to press the Video Player.
Then play your favorite movies.
Mine is 59.00545 do i need serial connection?
When we try to install other options, Do we always need to install swap file each time?
So this won't work on V59.00.502? Is there any hacks without getting to the wire/serial fuss or things like that?
Hello Dear, I did the same steps as you did about downloading and installing the Mazda AIO Tweaks and send it to USB. But when I try to install it on MZD in the car, it doesn't pop-up the instructions to follow-up. So, is there anything else I should do to my MZD before installing these applications like patching the system or break it in one way or another?
hi I followed all the steps , video started working but sound of any video is not working
Hello there! Please help. I want to install swapfile in order to give more memory to android auto. Can I then calmly turn off the car without fear that something will go wrong ? And how do I remove the usb flash afterwards ? And if I take out usb flash, will mzd connect start without it ? Thanks.