In this video, 1A Auto shows how to replace the steering column control module on a 05, 06, 07, 08, 09, 10 Chrysler 300.
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/oDK/1AXAA00013
• Phillips Head Screwdriver http://1aau.to/oDK/1AXAA00013
• 10mm Socket http://1aau.to/ouH/1AXAA00017
• T10 Torx Driver http://1aau.to/ogW/1AXAA00008
• Ratchet http://1aau.to/oD9/1AXAA00016
• Socket Extensions http://1aau.to/oyj/1AXAA00015
• Torque Wrench http://1aau.to/oiW/1AXAA00044
• Gloves http://1aau.to/obi/1AXSS00048
• Wire Ties
• 10mm Allen Wrench http://1aau.to/oR/1AXAA00007
For More Info visit us at http://1aau.to/h/95/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
After replace this part,, I need reprogram the computer or something else?
Hi im looking for s sccm for a 09 dodge charger 3.5 rwd but can't find it there can you please guide me to get the part
I have a huge issue; I disconnected my battery for an hour while I replaced the ignition coils on my 2008 magnum and the car fired up and I was I able to drive home. I got home turned it off and then turned it back on. I was content with the car. So I turned it off and locked it and went to apt and took a nap. I came back about two hours later and my fobit didn’t work so I manually open the door and tried to start it. It wouldn’t crank. Also the anti theft light keeps flashing. I got a locksmith and he tried to program new keys with two different programmers and they kept saying there was a connection error and the keys didn’t program so to speak. So the new keys allow everything to turn on but won’t crank. Some reason the anti theft system is engaged and it won’t start.
Does it also control the wiper?
After the install, does the SCCM need to be programmed at a dealer to work properly?
Thanks for your video! I have an electronic control steering column and it's memory doesn't work. Besides that it's movement is intermittent, so I have to press the lever few times to get it to the end positions. Is this the sensor I have to replace in my column that is shown on your video?
Would this also work on a 2008 Dodge charger?
Do you sell SCCM for 2013 ford focus sedan?
I looked on your website but didn't see anything there.
you touch the connectors to medal surfaces or your hands, to reduce static shock?