Limited Time: Get $10 Off Your Order
https://1aau.to/m/YT-Email-10dollars-Off
Buy Now!
New Shock & Spring Assembly from 1AAuto.com https://www.1aauto.com/*/i/1ASSP00130?utm_source=YouTube&utm_medium=description&utm_campaign=videodesc&utm_term=FrRQyAiBd70
1A Auto shows you how to repair, install , fix, change or replace your front struts with their loaded struts. This video is applicable the 01, 02, 03, 04, 05 Honda Civic
🔧 List of tools used:
• Flat Blade Screwdriver http://1aau.to/tXc/1AXAA00013
• Pry Bar http://1aau.to/taY/1AXAA00020
• 14mm Socket http://1aau.to/tT/1AXAA00015
• 15mm Socket http://1aau.to/tT/1AXAA00015
• 17mm Socket http://1aau.to/tT/1AXAA00015
• 19mm Socket http://1aau.to/thb/1AXAA00043
• 3/8 Inch Air Impact Gun
• 3/8 Inch Drive Ratchet http://1aau.to/tT/1AXAA00015
• Ratchet http://1aau.to/txk/1AXAA00016
• Swivel
• Torque Wrench http://1aau.to/tfy/1AXAA00044
• Rust Penetrant
• Floor Jack http://1aau.to/tfn/1AXAA00068
• Jack Stands http://1aau.to/tfo/1AXAA00065
For More Info visit us at http://1aau.to/h/6Y/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
You’re not torquing the bolts and nuts down?!
I’m looking for the torque for the bottom bolts
it seems easy
This is helpful now I don’t have to go to a mechanic and spend hundreds of dollars and lose my car for a week
I can’t get the bottom bolt to break free on the drivers side. Is it reverse threads
Very informative
I replaced my rear struts and the back of my car became higher than the front, I figured the front struts were worn as well so I replaced those but the back end is still higher. Any idea what could be wrong? The rear struts are from Monroe if that helps. I'm thinking maybe a manufacturer defect.
I replace my rear struts last week my rear is a little higher
are the springs the same width
This guy makes this installed looks so smooth versus me 3 hours trying to get the rear shock to go into place lol
what brand of the shocks is the best …for this civic
Is the nut on the back side of the lower bolt attached to the mounting bracket?
Hi
What can it be if my car became higher after replacing my rear struts?
What if my struts dont line up with the holes what can i do???
Great videos. I use your videos for my 2003 Honda civic. I tried removing the bottom bolt and had no luck using a braker bar. I tried pb blaster and let it sit, then walked with a hammer to losen the rust. Still it won't budge. I'm also thinking of purchasing an air impact wrench. Any recommendations of the torque/power needed and size of air compressor?
Any ideas on how to get that 3rd bold out ive use air ratchets electric impact and nothing seems to work
Well, that seems easy doesn't it?
Y'all shouldve took this opportunity to put in coilovers and lower it. then sell it for more.