Shop for New Auto Parts at 1AAuto.com http://1aau.to/c/85/q/engine-oil-pan
In the video, 1A Auto shows how to, remove, install, replace, or change a broken, worn, loose, or leaking oil pan. The video is applicable to the 08, 09, 10, 11, 12 Ford Escape
🔧 List of tools used:
• Pry Bar http://1aau.to/te4/1AXAA00020
• 12mm Socket http://1aau.to/takn/1AXAA00015
• 13mm Socket http://1aau.to/takn/1AXAA00015
• Oil Filter Wrench http://1aau.to/t5/1AXAA00026
• Ratchet http://1aau.to/taeg/1AXAA00016
• Socket Extensions http://1aau.to/takn/1AXAA00015
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags http://1aau.to/thD/1AXSS00035
• Engine Oil
• RTV
• Drain Pan http://1aau.to/tfD/1AXAA00320
• Funnel http://1aau.to/tcx/1AXAA00310
• Pick http://1aau.to/tfG/1AXAA00037
For More Info visit us at http://1aau.to/h/bwx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
Got quoted 550 for this at the local Ford dealership.
Bungee cord when reinstalling exhaust helps
If I can't do it myself, is there a rough estimate that I would have to pay to get it done by a mechanic?
What’s the power tool you’re using @ 16:36?
The one that started the stud through the hole.
Would this process be similar to a 2002 Ford Escape 3.0l v6? Thank you!
What kind of drill was that that was used to knock the stud out of the exhaust? What model and type of drill is that?
Fords yuk. That rubber cover you removed in the beginning, seemed like a bad idea to have an access point covered by rubber?