Thank you for making such a great video ! I just purchased a grease gun to
work on my snowblower and the salesman at the store had no idea how to load
one. The instructions that came to the grease gun were horrible to follow.
Your video answered all my questions and more and made it so easy. I took
my time loading it as you recommended and it works just fine. 🙂 Take care
This was very helpful. I have been missing a step in the cartridge loading
process. I wish that I saw your video before I launched my new grease gun
into the garbage can….lol
Thank you.
What kind of idiot doesn’t know how to put a cartridge in a grease gun? I
only ask because I’m wondering what kind of idiot that “I” am -lol. I was
ready to buy a new grease gun just for the directions. Such a simple thing
to over think it. Great tutorial, and I can now put on my resume that I CAN
fill a grease gun. Thanks
Thanks for the great video. No oftener than I have to load a grease gun I
will come here for a refresher course. I also learned something about
making sure everything is tight as well.
BIG thanks. It seems so simple, but for the life of me I couldn’t get mine
to work. After getting grease everywhere, I found you on youtube and now
the gun works. THANKS
Thank you so much! I was in a hurry this afternoon and, as you suggested,
managed to screw this up royally — grease all over and a still inoperable
grease gun. I use what I learned here and get it done tomorrow. (Isn’t
Youtube wonderful for these sorts of things?!)
Thanks . I never had loaded one before and what a mess of it before finally
getting it cobbled back together again. this makes it look so easy and I
realize now that I should have looked it up on youtube. great to learn.
Is that the Lincoln model 1134 or 1132 I’ve just purchased the 1134 it’s
shipping right now. Just wondering what you think about them. I’m only
using it to lube my JD lawn tractor
Isn’t the rod and plunger one solid unit? So by sliding it in straight away
you waste a lot of grease. Once the cartridge is in and the pump is screwed
on centralize the rod but don’t push it in it will be sucked in as you use
the grease
OMG! For years I have been pulling the spring out, loading the tube from
the back end, and then trying to stuff the spring back in and screw the
back on with the grease tube already in making a tremendous mess with
grease all over my hands. Thank you!!!!
Yes sir, the way I have done it for 40 years too, simple, clean, quick and
no tools. Thank you for sharing and also saving me from making a video like
this, well done!
Good information, thanks for this video. I hate grease guns but they are so
important for maintenance of the equipment. I always have some kind of
problem with loading the gun. I wish there was an easier design, but your
video helped me quite a bit. Keep up the good work!
Thanks Stan. I get very frustrated when I load the gun but no grease comes
out. That’s why I made that last bit at the end. I enjoy greasing equipment
if I’m not pinched for time. I hope the next time you load the gun it goes
smoother for you.
never refilled mine properly, but it always worked .
now I know ,thanks
Some one dumped a whole box of unused grease cartridges over the bridge.
this helped me with my air in the tube problem i was having thanks
Cheers mate, Good work
Thank you for making such a great video ! I just purchased a grease gun to
work on my snowblower and the salesman at the store had no idea how to load
one. The instructions that came to the grease gun were horrible to follow.
Your video answered all my questions and more and made it so easy. I took
my time loading it as you recommended and it works just fine. 🙂 Take care
Just getting ready to change mine to grease my camper wheels, thank
u,…Bob
I wish I would have watched this video before I struggled with my grease
gun for half an hour!!!!
This was very helpful. I have been missing a step in the cartridge loading
process. I wish that I saw your video before I launched my new grease gun
into the garbage can….lol
Thank you.
What kind of idiot doesn’t know how to put a cartridge in a grease gun? I
only ask because I’m wondering what kind of idiot that “I” am -lol. I was
ready to buy a new grease gun just for the directions. Such a simple thing
to over think it. Great tutorial, and I can now put on my resume that I CAN
fill a grease gun. Thanks
Thanks for the video.
Thanks! Good job.
Thanks for the quick tutorial. Easy to follow, got it right the first time
because of it!
Thanks for the great video. No oftener than I have to load a grease gun I
will come here for a refresher course. I also learned something about
making sure everything is tight as well.
Thanks Man, I’ve been trying to figure out why my gun would not work after
I just put in a new can. I did not know about the air pocket thing.
Great video. Grease guns are kind of complicated and it’s good to see a
professional review.
Whats the purple grease good for? My personal loader was recommended
red/tacky grease. just curious.
Exactly what I was looking for: an educational video with clear and concise
instructions, covering everything needed. Well done! Thanks.
BIG thanks. It seems so simple, but for the life of me I couldn’t get mine
to work. After getting grease everywhere, I found you on youtube and now
the gun works. THANKS
Very clear and helpful. Thanks!
great looking workbench set up, oh and thanks for the tutorial how to load
a grease gun.
Awesome peg board.
Thanks for the video. Well done.
Thank You! The mystery is solved!!!
Very easy and precise to follow. First time I’ve greased the bearings on my
travel trailer and everything went well on the first try.
Very helpful video, thanks
Thank you so much! I was in a hurry this afternoon and, as you suggested,
managed to screw this up royally — grease all over and a still inoperable
grease gun. I use what I learned here and get it done tomorrow. (Isn’t
Youtube wonderful for these sorts of things?!)
this was an excellent video! thank you!
Thanks . I never had loaded one before and what a mess of it before finally
getting it cobbled back together again. this makes it look so easy and I
realize now that I should have looked it up on youtube. great to learn.
thank you so much
Thanks for sharing, it’s been a couple of years since I last needed to do
this.
Is that the Lincoln model 1134 or 1132 I’ve just purchased the 1134 it’s
shipping right now. Just wondering what you think about them. I’m only
using it to lube my JD lawn tractor
Isn’t the rod and plunger one solid unit? So by sliding it in straight away
you waste a lot of grease. Once the cartridge is in and the pump is screwed
on centralize the rod but don’t push it in it will be sucked in as you use
the grease
OMG! For years I have been pulling the spring out, loading the tube from
the back end, and then trying to stuff the spring back in and screw the
back on with the grease tube already in making a tremendous mess with
grease all over my hands. Thank you!!!!
hahaa WTF. I been doing it wrong this whole. time.
Needed to grease my tractor, thanks for making this video!
Btw isn’t there a bleeder valve on the top
Yes sir, the way I have done it for 40 years too, simple, clean, quick and
no tools. Thank you for sharing and also saving me from making a video like
this, well done!
Good information, thanks for this video. I hate grease guns but they are so
important for maintenance of the equipment. I always have some kind of
problem with loading the gun. I wish there was an easier design, but your
video helped me quite a bit. Keep up the good work!
I would be impressed if my wife pulled that off. Do it right before you get
a mani so they can clean the grease off your cuticles. 🙂
magic thanks alot
You’re welcome. That’s the same way someone showed me over 20 years ago.
Thank you!
Thanks Stan. I get very frustrated when I load the gun but no grease comes
out. That’s why I made that last bit at the end. I enjoy greasing equipment
if I’m not pinched for time. I hope the next time you load the gun it goes
smoother for you.