How to install Interior LEDs on a 2008 BMW 3 Series E90/E91/E92 http://www.precisionled.com/catalog/product/view/id/638/s/bmw-3-series-led-interior-lights-ki…
How to install Interior LEDs on a 2008 BMW 3 Series E90/E91/E92 http://www.precisionled.com/catalog/product/view/id/638/s/bmw-3-series-led-interior-lights-ki…
You must be logged in to post a comment.
Awesome video ! Thank you !
are the ones in the video 6000k or 8000k?
The Glove Box and Vanity Mirror LEDs are not required to be error free but
the rest are. It will not throw an error code.
All the LEDs are error free except for the Glove Box and Vanity Mirror.
Does that mean it will throw a code?
is possible to have led lights for ambient lighting of the door of a BMW
E92? stock are orange but they are not very bright
@MrMartinz73 You may purchase the full kit from the URL listed under the
video at PrecisionLED
Did the car you use have covers on the map lights?
Hi, You may try viewing another video we have that helps remove hard to
reach bulbs. Using some tape and needle nose, it can help you remove the
bulb: Search under PrecisionLED videos – How to Remove 168 194 T10 and BA9S
Type Bulbs Good luck!
thanks
should i disconnect battery so I dont blow a fuse?
how do you replace the DOM light on a 2009 328i convertible?
To get the map lights out. At the top there is a small flat spot. I put a
tiny flat head it it popped right off. Getting the bulb out is hard
Does this void bmw warranty?
It is not necessary to disconnect the battery but it does not hurt.
I bought LEDs from a different company before and I was super upset because
the dome and map lights would go out after a couple seconds while i was
driving. I emailed the people and they said it was normal but that just
doesnt seem right. Before I finally get these I wanted to know if that
would happen on these
OK, having a problem with the map lights. On my car, there is a little
plastic cover almost like a pane of glass in each map light. So, unlike
your video, I can’t reach into it and pull it out w/fingers as you did.
Also, not really enough room around edges for pry tool. Suggestions?
Thanks!!
Hi, The LEDs in our packages do not exhibit the same issues you have
described. Most likely the LEDs you purchased were not CanBus LEDs. Regular
LEDs cause many issues with BMW vehicles. Thank you. ~PLED Team
try putting on a smile next time
Some problem like BP5ec18L. I have o8 m3 there are lens cover that dome
light on each side
Hello David, The LEDs that we sell in the complete package will not cause
any error codes with the BMW computer. All the LEDs we use in this package
are CanBus LEDs which helps to eliminate the fault codes. ~PLED Team
I think you misunderstood. I can’t even get to the bulb because of a lens
in front of the bulb. I’ll search though, Thanks.
Hi, The color of bulbs we used in the video is 6000K. The package that you
purchase from us are all plug and play LEDs, not modules. You will not need
to modify your vehicle.
How did you pull out the dome light so easily? Mine won’t come out when I
pull it
I wish you will show trunk, license and vanity too
hi, where is that plastic knife tool located? tnx
Rahim, Send is an email to Sales(at)PrecisionLED(dot)com and we can help
you out with our current coupon code offer. I cant post it here because the
comment will stay up longer than the code will be valid. Cheers, -Phil @
PLED
Where can i get replacement frosted lens for my front dome lights? I broke
off a tab and it wont stay in properly
in this video are the bulbs 6000k or 8000k??? and for e92 coupe , and all
are bulbs??? not modules of leds like your competitors??